www.imoc.co.uk

wish I could mate, so skint have to sell it before I can get another car...thats all I will be getting anyway I think, on ebay these cars are only getting £500!!!

Hi all, Unfortunatly the MR2 needs to go, My missus has a new a job and I have to collect 2 kids after work every night and can't do it with 2 seats and im gutted. The car has served me well and has never let me down in the year or so I have had her, I have fixed various bits but as a g plate rev1 n...

just to say thankyou to you both, many many kudos

Had a long lunch and managed to get the one off at the scrapyard, got home at half 7 and have just finished fitting to my car. Last hour of that was bleeding, think it needs driving now and then bleeding again.

many thnks

thanks for the reply so quickly. was hoping didnt have to come from underneath though. Do you reckon a jack will lift the car enough?

How do I remove a radiator from a mk2 rev 1 na. Mine has a big hole in it and the scrapyard said I need to remove the one they have myself. Need to make sure I have the right tools with me and can do it on my lunch break. I am hoping they come from above???? Thanks in advance After a quick answer if...

just been out to check her now she ha called down and n water in her at all.

tis weing out the radiator.
Anyone got a spare!!!???

Had to do a quick 50 mile trip tonight and just got home. When I was half way back my heaters suddenly went cold..I nearly bloody froze out there tonight. Got off the motorway and noticed my temp guage was only 2 notches below the red. I havent had any problems with the car before and it has started...

Pain in the ar$e. Then water starts to drip on your head as the t-bar glass finally starts to defrost.. Glad I have my works van, just leave the 2 at home. Hate driving it in the winter conditions to be honest, always feel like the weather is eating away at it and it`s just not fun! Need a garage b...

did my rears less than 6 months ago

My rev 1 was the same when I got it. I stripped down the drivers door panel and if you trace the wires there is a sensor that clips on to the inside of the drivers door lock that registers you locking the door and sends a signal to the other door to lock as well. When I got mine half the clip was br...

also used big red, cheapest and they are loal to me, parts were all spot on

I seem to have a bit of a super car when it comes to mpg, although it is far from super on power!!

My MR2 is just for work, I do 50 miles of m/way each day and if I take it easy in busy trafic I get 10 miles per litre, So for 50 quid of fuel I would get 500 miles. Drains it fast round town though.

bit of a disapointing day in the end...... Hadnt seen the car beforehand, it was another rev1 but had the rear lights updated, didnt have them as they were all scratched. Arial must have borkn before so he had removed te sides of the rear spoiler and put a halfords one in...no thanks I got a few bit...

so my mk2 rev1 only has a passenger side sub, behind the drivers seat is a lockable storage box. I have today acquired a drivers sub from a rev 2 and want to wire it in. I have removed the box that is there at the moment and found no wiring for another sub. I think im correct in saying that these ar...

rev 1 interior mirror, disappears inside the cover with the interior lights built in it on the roof and I assume this needs to be removed to change the mirror. How do I get it off?? I have been pulling on the cover as there are no visible fixings and it just feels like its gonna snap off. Do I just ...

it is a diffrent colour yea, the cenre panel of the rear lights will need to be painted, I need to get the car home so will just fit the rear lights into place so legal to drive and will sort later. I am hoping there are 2 keys to the car so I can nick one of them to keep in the boot lock. Out of al...

Today I am a very lucky boy, I currently have a rev 1 rather old high mileage mr2 that I love but many parts have seen better days. I work for a car dealership and have taken in a rev 3 MR2 on the scrappage scheme and have the day off work tomorrow of which I will be spending the day in the works co...

a lot of time road testing and putting on ramps in the garage and managed to trace the noise to the brake caliper. Becuase my rear discs are warped they have been moving the caliper slightly when braking, this in turn has been letting small amounts of air into the top joint of the caliper/carrier an...

ok, so ive started getting a knocking from the osr wheel of the mr2 Noise only happens when braking and noticable at slower speeds, although I think this is due to less road noise more than anything. I did a seal kit in my rear brakes 3000 miles ago as osr was seized and thought it might have gone a...

Couldnt find anything at twosrus for aerials.

Have been looking about and quite like the look of the shark fin aerials if I decide to move it to the roof, If I move the wiring so it is all in the cabin I should get beter reception too as it wont go near the engine.