www.imoc.co.uk

I'm having the same problem, could ditching all heat shields and just heat wrapping the exhaust work??

How much should I be looking at to get the clutch replaced on my mk1b? I'll get the clutch so just after labour costs, 3-4 hours maybe?

Not sure if this is in the right place but I'm after just the front two koni shocks secondhand, got springs for them

Handbrake is ok, works fine to stop it rolling down hills etc but wouldn't lock the wheels say if you wanted to do a handbrake turn.

Checked rear pads and theyre got plenty of life left, brake fluid could do with a little top up but it's not below the min line... I noticed on one of the rear discs only half the pad is being used.. Think I'll take the calipers off give them a clean and grease and top up the fluid and give all 4 ca...

Right I seem to be having some problems with my brakes, first one is when I'm hard on the brakes the brake light comes on the dash and then it will stay on for awhile... I can also hear squeaking when breaking from the rear calipers... And also I find the breaks lock up too easy, my setup is standar...

Okay I'll see if the standard springs are in good enough condition then! One thing I'm confused about, obvisously the shock has failed cos it's bouncing everywhere! But it's also rattling and banging, when the car is on the floor when I shake the wheel the whole shock is moving from side to side and...

Would it be ok to fit the konis with lowering springs on the rear with standard on the front?? Ovisiously the rear would sit lower than the front but would it done anything bad to the handling?? Also does anyone know Spec I tighten the 19mm strut bolt to?? No I didn't get that one, I ended up with a...

Well the rear shocks need changing on my mr2, the car.is a mk1 b and it's got standard suspension, I've got koni adjustable shocks for just the rear in my garage, they currently have -35mm springs on them, would it be ok for me to run the standard front suspension with the konis on the rear with sta...

I'm hopefully getting hold off a mk1a, it's had new genuine Toyota shocks n springs, I have a some brand new kyb shocks which need springs... Do you guys think I should fit the kybs or just leave the new standard suspension?? If so which springs would you reccomend? As I heard kybs can be quite hars...

Yer it did, the cabin was fine!
Not yet but hopefully I'll be getting it soonish, it's not actually a sc just an NA but personally I love the sherwood colour scheme !!

Finally found out how to upload on my phone!

Yes Peter it's been on the island it's whole life, it's been garaged most of its life but the owner has had to put it on his drive to make room for stuff but by the sounds of things it hasn't been used in several years!

Oright ok, didn't know if it was a special edition or anything!
Did they just make them on the early mk1 a ? Or did also make them in the mk1 b's?

Anyone got pics and more info on the sherwood tone mr2's??
I've never seen one before and I maybe getting my hands on one!
2owners, full service history, 37,000 miles, 1986... Just needs a little tlc and it's sorn'd. Looking forward to working on it if I can get it!

Well recently i had quite a bad crash in my mr2, hit another car almost head on about 70 and I'm very surprised how well the car held up! The front was completely caved in but all the cockpit was untouched and I came out uninjured which I and alot of others were surprised at! Just wondering if anyon...

Ive recently spent abit off money with the suspension off my car... It has konis adjustable all round, full rebuild of the front suspension, poly bushes on front ( have them for rear just haven't got round to fitting them. I find I'm losing the back end far to easy around corners soo much so I have ...

Yes it was only run for about 10 secs

Update time... Noticed the little metal pipe on top of the tvis manifold had cracked... Taped it up and thats solved the poor mpg and black smoke, the whine is still there tho, tired running the engine without the belt to make sure it wasn't the alt or anything but it's still doing it I'll try the c...

its like a whine on tick over and almost like a hissing noise when im on the throttle...
the efi sensor works now aswell..
ive only just replaced the hg and rebuilt the head for yous that didnt know, dunno if that could help get to this annoying problem!!