The amount of questions i ask is just silly!
Ok! All in...
Car will not start (didn't think it would), alarm constantly sounds and my stock toyota boost gauge goes through the roof.
The alarm is linked into the car body wiring loom so i would guess by repinning the ecu one of the wires to the alarm thinks its being hijacked, so i have a constant car alarm. Fun
As for the toyota boost gauge going straight to the top when i turn the car over??? I have no idea..
Anyone else have any rev 3 conversions issues like this.
Please share
[Mk2] [Turbo] Rev 3 conversion issues
Moderators: IMOC Moderators, IMOC Committee Members
Re: [Mk2] [Turbo] Rev 3 conversion issues
As said chap in the pm
What did you do when pinning the ecu? e.g. give me a list of wires you've changed
Close up pics would be good of the ecu cabling So i can see teh colors
What did you do when pinning the ecu? e.g. give me a list of wires you've changed
Close up pics would be good of the ecu cabling So i can see teh colors
Re: [Mk2] [Turbo] Rev 3 conversion issues
Copied wire diagram from the 2bartuning website, which i cross referenced with other diagrams, all seem correct.
Re: [Mk2] [Turbo] Rev 3 conversion issues
This is what i've come up with so far
Re: [Mk2] [Turbo] Rev 3 conversion issues
Anyone any more ideas?
Re: [Mk2] [Turbo] Rev 3 conversion issues
Re-pinned back to rev 1 settings with rev 1 ecu and i now have no alarm..
Yey.. So i can rule out the alarm by back tracking the loom to the ecu point.
Yey.. So i can rule out the alarm by back tracking the loom to the ecu point.