![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
Moderators: IMOC Moderators, IMOC Committee Members
acf8181 wrote:Both my previous UK rev2's(one t bar, one sunroof) had the two sub system, my import rev3 didnt have it but i retrofitted it.
Wiring isn't there, you need a full cockpit loom from one that has it..
.
.i then removed the audio wiring from the loom and ran it next to existing car loom.
Only other bits you need are the subs, grills, and autoleads adapter.
Only issue i had was someone had chopped the headunit connectors off my loom, which i've refitted but have developed some interferance..
.
.so if you can get one thats uncut it'd be much easier.
stuMR2eye wrote:acf8181 wrote:Both my previous UK rev2's(one t bar, one sunroof) had the two sub system, my import rev3 didnt have it but i retrofitted it.
Wiring isn't there, you need a full cockpit loom from one that has it..
.
.i then removed the audio wiring from the loom and ran it next to existing car loom.
Only other bits you need are the subs, grills, and autoleads adapter.
Only issue i had was someone had chopped the headunit connectors off my loom, which i've refitted but have developed some interferance..
.
.so if you can get one thats uncut it'd be much easier.
Exactly how I did it.You also need the 3 amplifiers.
I fed the 3 blue/yellow power wires with a direct battery fused link for good clean power.
I also had to repin the adapter to sort out interference as its a known issue on certain ones.
stuMR2eye wrote:It's an earthing issue.![]()
See this thread: http://mr2oc.co.uk/ocforum/viewtopic.php?t=131722