Anyone tried them?
UK road friendly?
[Mk2] [NA] Apex lowering springs?
Moderators: IMOC Moderators, IMOC Committee Members
Re: [Mk2] [NA] Apex lowering springs?
Got them on my car, done the Le Mans trip twice with them on, 4000 miles.
Recommended.
Recommended.
Re: [Mk2] [NA] Apex lowering springs?
Are there any poly bushes in your suspension? Good job you're reading this as after 4000 miles in a mr2 you must be deaf! Lol
Re: [Mk2] [NA] Apex lowering springs?
Do a forum search and you should find a lot of posts about them.
-
- IMOC Moderator
- Posts: 10902
- Joined: Sat Dec 10, 2005 1:32 pm
- Location: Bonnie Dundee
- Contact:
Re: [Mk2] [NA] Apex lowering springs?
Have them on mine, feel ok, not massively different from stock really. Lower obviously.
-
- Posts: 581
- Joined: Fri Aug 29, 2014 7:39 am
Re: [Mk2] [NA] Apex lowering springs?
Poly ARB bushes being fitted.
Re: [Mk2] [NA] Apex lowering springs?
Had them on my Rev5 before I fitted coilovers, ride is nice without any harshness.
Re: [Mk2] [NA] Apex lowering springs?
Quibble wrote:Are there any poly bushes in your suspension? Good job you're reading this as after 4000 miles in a mr2 you must be deaf! Lol
My car is fully polybushed, yes.
Re: [Mk2] [NA] Apex lowering springs?
Thought I'd recycle this thread rather than start a new one since it's related to Apex lowering springs.
Just wondered if anyone has any side on profile shots of the MR2 on the 30mm lowering springs BUT with 16 inch wheels.
I've seen a fair few pics with them on 17s and the arch looks cool (in my opinion). I've got a feeling that with 16s that the gap will look too big (especially at the front) so I'm not really sure what my options are with getting that nice stance that the 17s get.
Pics and/or suggestions please!
Just wondered if anyone has any side on profile shots of the MR2 on the 30mm lowering springs BUT with 16 inch wheels.
I've seen a fair few pics with them on 17s and the arch looks cool (in my opinion). I've got a feeling that with 16s that the gap will look too big (especially at the front) so I'm not really sure what my options are with getting that nice stance that the 17s get.
Pics and/or suggestions please!
Re: [Mk2] [NA] Apex lowering springs?
Here you go. 16" Enkei RP01s, Apex 30mm lowering springs on Black Bilstein struts, Rainsport3 tyres in 205/50 & 225/50:
Re: [Mk2] [NA] Apex lowering springs?
Ace! Thanks stu.
Do you think it's the tyre profile that is key to reducing that gap?
I run 45s and some of the pics I've seen seem to have the cars sitting a lot higher than yours. I'd be more thank happy if the stance was as yours is!
Do you think it's the tyre profile that is key to reducing that gap?
I run 45s and some of the pics I've seen seem to have the cars sitting a lot higher than yours. I'd be more thank happy if the stance was as yours is!
Re: [Mk2] [NA] Apex lowering springs?
Definitely, the chunky tyre profile makes the gap much better. I had 205/50 front and 225/45 rear before. The fronts looked much better than the rears.
The higher profile tyre gives a better choice in tyre make, closes the arch gap up nicely (by about 1cm), and helps the car absorb the bumps better. Not really noticed any loss in handling but then I don't really push the car too hard.
The higher profile tyre gives a better choice in tyre make, closes the arch gap up nicely (by about 1cm), and helps the car absorb the bumps better. Not really noticed any loss in handling but then I don't really push the car too hard.
Re: [Mk2] [NA] Apex lowering springs?
stuMR2eye wrote:Here you go. 16" Enkei RP01s, Apex 30mm lowering springs on Black Bilstein struts, Rainsport3 tyres in 205/50 & 225/50:
Exactly the same set up as me, albeit with 16" 300ZX wheels. Nice and chunky. Can't wait to get them on the car. Looking good there mate.