Hi,All
Anyone, know the Part Numbers, for the AW11 MR2 front valance corners?
As in the corner parts, under the front bumper !.
(I have a few replacement ones, but non are 100% condition wise, hence)
Silly Money from Toyota, or not: ?
Regards
David
PS Also the underside front bumper skin braces/brackets ?.
MR2 AW11 Front Valance corners,Part No ?. ...
Moderators: IMOC Moderators, IMOC Committee Members
Re: MR2 AW11 Front Valance corners,Part No ?. ...
I tried to get new ones for my respray in 2011 and one side is discontinued! Or was back then.
I have the part numbers at home, will check later.
Edit: found them:
53901-17021 Front valance rh
53902-17020 Front valance lh
I have the part numbers at home, will check later.
Edit: found them:
53901-17021 Front valance rh
53902-17020 Front valance lh
Re: MR2 AW11 Front Valance corners,Part No ?. ...
LeSpank wrote:I tried to get new ones for my respray in 2011 and one side is discontinued! Or was back then.
I have the part numbers at home, will check later.
Edit: found them:
53901-17021 Front valance rh
53902-17020 Front valance lh
Image Replaced With URL For Quote http://opc.mr2oc.com/online_parts_catal ... enders.gif
Many/Lots of thanks!
Kind Regards
David
Re: MR2 AW11 Front Valance corners,Part No ?. ...
Remember that they are different depending on whether you have a 1a or 1b
Re: MR2 AW11 Front Valance corners,Part No ?. ...
MartG wrote:Remember that they are different depending on whether you have a 1a or 1b
...Are the Above part numbers, for latter B type then ?.
Re: MR2 AW11 Front Valance corners,Part No ?. ...
If the diagram is accurate they are 1b ones as don't reach to centreline of the car and fit the 2 part splitter. The 1a ones are longer and meet in the middle of the car, with a one-piece plastic splitter underneath them.
Re: MR2 AW11 Front Valance corners,Part No ?. ...
Here the 1a for comparison:
For part numbers: http://www.toyodiy.com/parts/p_E_1985_T ... _5302.html
For part numbers: http://www.toyodiy.com/parts/p_E_1985_T ... _5302.html
Re: MR2 AW11 Front Valance corners,Part No ?. ...
XLarge wrote:Here the 1a for comparison:
Image Replaced With URL For Quote http://www.toyodiy.com/parts/diag_AzFavu.png
For part numbers: http://www.toyodiy.com/parts/p_E_1985_T ... _5302.html
102 Euros a side ( eyes crumbling ones on 1a trackday car, wonders about fixing them and making moulds to produce fibreglass ones... )
Re: MR2 AW11 Front Valance corners,Part No ?. ...
Maybe worth the work. I´m sure You can sell them. They´re mostly rotten and I´m nearby sure they´re discontinued by Toyota like most of the body parts.
Re: MR2 AW11 Front Valance corners,Part No ?. ...
MartG wrote:XLarge wrote:Here the 1a for comparison:
Image Replaced With URL For Quote http://www.toyodiy.com/parts/diag_AzFavu.png
For part numbers: http://www.toyodiy.com/parts/p_E_1985_T ... _5302.html
102 Euros a side ( eyes crumbling ones on 1a trackday car, wonders about fixing them and making moulds to produce fibreglass ones... )
Hi,Indeed
...Ive have Also considered that , as in getting composite ones made!
David
Re: MR2 AW11 Front Valance corners,Part No ?. ...
DJJAW11 wrote:MartG wrote:XLarge wrote:Here the 1a for comparison:
Image Replaced With URL For Quote http://www.toyodiy.com/parts/diag_AzFavu.png
For part numbers: http://www.toyodiy.com/parts/p_E_1985_T ... _5302.html
102 Euros a side ( eyes crumbling ones on 1a trackday car, wonders about fixing them and making moulds to produce fibreglass ones... )
Hi,Indeed
...Ive have Also considered that , as in getting composite ones made!
David
UPDATE, Spoke with Toyota Dealer/Parts...
I was about to order some, 60+ each, and they are no longer manufactured, ar$e to that.
MRS maybe he he.
David
Re: MR2 AW11 Front Valance corners,Part No ?. ...
I've often wondered how well it would work if you got the whole valance/splitter assembly vacformed similar to an RC car bodyshell. It'd be lightweight, flexible (preferable to fibreglass that will crack when you catch it on a speedbump) and because it could be painted on the inside (dependent on how thick the material would need to be) it'd be resistant to the usual paint chips and scrapes that these parts usually pick up.
Re: MR2 AW11 Front Valance corners,Part No ?. ...
I suspect that if you tried to produce a vacformed part that size from the same material as R/C car bodies ( lexan/polycarbonate ) you'd need to make it a lot thicker to make it stiff enough - which would make it both heavy ( feel the weight of a crash helmet visor, then imagine something the size of the valance & splitter made of the same material ) and more likely to crack
Re: MR2 AW11 Front Valance corners,Part No ?. ...
MartG wrote:I suspect that if you tried to produce a vacformed part that size from the same material as R/C car bodies ( lexan/polycarbonate ) you'd need to make it a lot thicker to make it stiff enough - which would make it both heavy ( feel the weight of a crash helmet visor, then imagine something the size of the valance & splitter made of the same material ) and more likely to crack
...Indeed.
I think the AW11 Front Valance corners in a Composite, Diolen, Carbon/ Kevlar, etc, would be the way to go guys.
Anyone like to take it up, or get in touch with Good Old Paul Woods etc 
David
Re: MR2 AW11 Front Valance corners,Part No ?. ...
There was a guy on ebay last year offering a complete one-piece front end which included valance, splitter, and bumper - all done in grp. IIRC it was very expensive ( £500+ ) and there was only 1 available, which didn't sell
Re: MR2 AW11 Front Valance corners,Part No ?. ...
Auto Style front bumper solves the valence issue as it replaces them with one piece composite bumper skin
Re: MR2 AW11 Front Valance corners,Part No ?. ...
If i can get my hands on good condition originals ill have a go. Ive got all the stuff to mould it and make it.
Alex
Alex
platmatt8 wrote:Lauren has got bigger balls than most men on this site
charged wrote:Mine's probably screaming 'stop raping me'
Re: MR2 AW11 Front Valance corners,Part No ?. ...
pk_090 wrote:If i can get my hands on good condition originals ill have a go. Ive got all the stuff to mould it and make it.
Alex
...I have 3 of them. one Good condition, others so so, or could be made good
Re: MR2 AW11 Front Valance corners,Part No ?. ...
MartG wrote:There was a guy on ebay last year offering a complete one-piece front end which included valance, splitter, and bumper - all done in grp. IIRC it was very expensive ( £500+ ) and there was only 1 available, which didn't sell
I've got something very similar that came attached to FEAM (Bumper and valance is one piece, splitter has left and right halves that bolt on). The valance part is rather rudimentary looking though, you probably wouldn't want it on a road car.