Front tyre sizes, max width on 17's?

Discussion and technical advice the SW20 MR2. 3S-GTE, 3S-GE, 3S-FE etc
Anything and everything to do with maintenance, modifications and electrical is in here for the Mk2.

Moderators: IMOC Moderators, IMOC Committee Members

Torero
Posts: 1578
Joined: Sat Nov 29, 2008 11:33 pm
Location: Westminster, London
Contact:

Re: Front tyre sizes, max width on 17's?

Post by Torero »

Interesting Calum, I had planned to buy 235/40 fronts, as my wheels have come from a Skyline and are supplied with 255/40 rears (et40) with good rubber. I wanted to keep the 20mm tyre offset, however, this looks as if 215s would be far better.

I was talking to Kayjay0_7 last week andmentioned this and he has actually used 215s front and 255s rear without issue.
3VZ-FE V6 TRD Widebody Replica

Draven wrote "TRD dude. TRD... Can see awesomness from anywhere. "

http://www.imoc.co.uk/forums/viewtopic. ... sc&start=0
synXero
Posts: 3781
Joined: Fri May 28, 2010 12:04 pm
Location: London, Edinburgh, or the Highlands!

Re: Front tyre sizes, max width on 17's?

Post by synXero »

You will probably get understeer with equally sticky front/rears with 215 up front and 255 rear, but you can never say for sure til you try it!

You could certainly run 245 rears and 215 fronts, or 225 fronts. In all my configurations I've found 30mm stagger works nicely. Although someone will probably shout at me for it, I quite like different brands front to back, afterall, the tyres are supposed to do different things...

Current set up is Michelin CS on the rear, 245/40/17, and Bridgestone Potenzas on the front, 215/40/17.
Al-sw20
Posts: 1623
Joined: Sun Jan 23, 2005 6:01 am
Location: Christchurch, New Zealand
Contact:

Re: Front tyre sizes, max width on 17's?

Post by Al-sw20 »

IMO for best handling go a double stagger.

16x7 on front. 205/45R16 and 17x8.5 rear, 245/40R17.
bobhatton
Posts: 3351
Joined: Fri Aug 25, 2006 9:34 pm
Location: Bodmin Cornwall

Re: Front tyre sizes, max width on 17's?

Post by bobhatton »

RyanRs wrote:

235/40 is the size i had in mind, i am using 215/45 atm with loads of clearance on an 8J rim. I just need some more grip up front to compliment the 4-pot calipers i have on there. I am considering some R1R's on the front and the rears will be r888 275/40/17 -i know these will not fit the arches however i have intent on fitting arch flares soon. suspension btw is tien ype- flex.



Just because it is wider it does not mean you will get more grip under braking, in fact you may get less as the wider the tyre the less weight per inch of rubber on the road.

Go back to stock brakes with Porterfield pads and problem solved
Designer for turbo set ups on F1 cars, and Nitrous Oxide Systems of the USA in the 80s
raptor95GTS
Posts: 6213
Joined: Tue Dec 14, 2004 7:14 pm
Location: glasgow
Contact:

Re: Front tyre sizes, max width on 17's?

Post by raptor95GTS »

lol bob
Torero
Posts: 1578
Joined: Sat Nov 29, 2008 11:33 pm
Location: Westminster, London
Contact:

Re: Front tyre sizes, max width on 17's?

Post by Torero »

bobhatton wrote:Just because it is wider it does not mean you will get more grip under braking, in fact you may get less as the wider the tyre the less weight per inch of rubber on the road.


Well said, Bob :clap: This is why I wanted 215s.

I think in the end I may have to fork out for 4 new pieces of rubber. #-o
3VZ-FE V6 TRD Widebody Replica

Draven wrote "TRD dude. TRD... Can see awesomness from anywhere. "

http://www.imoc.co.uk/forums/viewtopic. ... sc&start=0
synXero
Posts: 3781
Joined: Fri May 28, 2010 12:04 pm
Location: London, Edinburgh, or the Highlands!

Re: Front tyre sizes, max width on 17's?

Post by synXero »

Torero wrote:I think in the end I may have to fork out for 4 new pieces of rubber. #-o


There isn't much on an MR2 you can spend money on that's worth more :thumleft:
raptor95GTS
Posts: 6213
Joined: Tue Dec 14, 2004 7:14 pm
Location: glasgow
Contact:

Re: Front tyre sizes, max width on 17's?

Post by raptor95GTS »

Torero wrote:
bobhatton wrote:Just because it is wider it does not mean you will get more grip under braking, in fact you may get less as the wider the tyre the less weight per inch of rubber on the road.


Well said, Bob :clap: This is why I wanted 215s.

I think in the end I may have to fork out for 4 new pieces of rubber. #-o

yeah quality tyres are the best mod for any car but dang dont people like to make things simple because it suits them :wink:
MR2O12
Posts: 219
Joined: Thu Jan 19, 2012 6:43 am
Location: London

Re: Front tyre sizes, max width on 17's?

Post by MR2O12 »

imo you do gain grip from wider front tyres but you loose agility. need to find the perfect balance
dan4
Posts: 230
Joined: Sun Sep 25, 2011 10:08 pm
Location: kent
Contact:

Re: Front tyre sizes, max width on 17's?

Post by dan4 »

215/45/17 on 17x8 et35 doesn't fit. Hits spring cup and inner arch. Back to drawing board ](*,)
synXero
Posts: 3781
Joined: Fri May 28, 2010 12:04 pm
Location: London, Edinburgh, or the Highlands!

Re: Front tyre sizes, max width on 17's?

Post by synXero »

dan4 wrote:215/45/17 on 17x8 et35 doesn't fit. Hits spring cup and inner arch. Back to drawing board ](*,)


Mr2s on 17" wheels, especially if lowered = use 40 profile not 45. 45 is bigger than stock rolling radius anyway so not only does it rub, on the rear the speedo will be out regardless of the tire thickness you use. 245/45/17 for example will fit a skyline but won't even roll on a lowered 2. On the front obviously no speedo implications, but still 40 profile is correct :thumleft:
dan4
Posts: 230
Joined: Sun Sep 25, 2011 10:08 pm
Location: kent
Contact:

Re: Front tyre sizes, max width on 17's?

Post by dan4 »

I needed 45 profile front to match up with wider 40 rears, using 40's at front is going to look odd so I may run a square setup
bobhatton
Posts: 3351
Joined: Fri Aug 25, 2006 9:34 pm
Location: Bodmin Cornwall

Re: Front tyre sizes, max width on 17's?

Post by bobhatton »

dan4 wrote:I needed 45 profile front to match up with wider 40 rears, using 40's at front is going to look odd so I may run a square setup



So you are only doing it for looks not for the best handling and grip?
Designer for turbo set ups on F1 cars, and Nitrous Oxide Systems of the USA in the 80s
dan4
Posts: 230
Joined: Sun Sep 25, 2011 10:08 pm
Location: kent
Contact:

Re: Front tyre sizes, max width on 17's?

Post by dan4 »

In a word yes, otherwise id be running 195/205 ad08 setup on stock wheels....
Tsia
Posts: 1569
Joined: Fri Sep 23, 2011 9:12 pm
Location: Milton Keynes

Re: Front tyre sizes, max width on 17's?

Post by Tsia »

It could be worse! Could be the following monstrosity:
Image

God I hate that look.
bobhatton
Posts: 3351
Joined: Fri Aug 25, 2006 9:34 pm
Location: Bodmin Cornwall

Re: Front tyre sizes, max width on 17's?

Post by bobhatton »

:thumleft:
Designer for turbo set ups on F1 cars, and Nitrous Oxide Systems of the USA in the 80s
Al-sw20
Posts: 1623
Joined: Sun Jan 23, 2005 6:01 am
Location: Christchurch, New Zealand
Contact:

Re: Front tyre sizes, max width on 17's?

Post by Al-sw20 »

^^ Still looks epic.

Haters gon hate though.
RikH77
Posts: 1407
Joined: Thu Nov 24, 2011 8:39 pm
Location: West Yorkshire

Re: Front tyre sizes, max width on 17's?

Post by RikH77 »

215/40 here on 7.5" rims stock suspension no issues but bit of stretch on tyres 8)
synXero
Posts: 3781
Joined: Fri May 28, 2010 12:04 pm
Location: London, Edinburgh, or the Highlands!

Re: Front tyre sizes, max width on 17's?

Post by synXero »

215/40s on a 7.5J shouldn't be that much of a stretch! Mind you manufacturers are all different. Mine seem pretty much straight on, no stretch, I don't go for that faggotry :lol: :lol:
RikH77
Posts: 1407
Joined: Thu Nov 24, 2011 8:39 pm
Location: West Yorkshire

Re: Front tyre sizes, max width on 17's?

Post by RikH77 »

your right, just checked the d1s, they're 8"
Post Reply

Return to “MR2 MK2 1990 - 1999 NA & Turbo”