Having trawled the forum and the internet I'm still struggling to find a decent and affordable set of replacement droplinks for my Tein super street coilovers. The main problems being the length (190mm) and that they have the bolts facing in different directions.
I've read that the ones from the Avensis fit but can be too short which interferes with the turning circle of the car, etc.
I have also read the drop links from the Mini One could also possibly fit as they have opposite facing bolts but I'm not sure what length they are - if any one knows and can shed some light I'd appreciate it.
Finally, the only other thing I've found which comes close are these:
http://www.ebay.co.uk/itm/MAZDA-PREMACY ... 439c5b0d6c
Like the Tein drop links they have the bolts facing in opposite directions and more importantly they also are the same length (190mm). The only thing I'm not sure is whether the bolt length or diameter is correct - has anyone ever used these to replace their Tein drop links and had any success - if so, I'd love to hear from you.
Cheers,
Henry
Droplinks for Tein Super Street coilovers
Moderators: IMOC Moderators, IMOC Committee Members
-
- Posts: 264
- Joined: Sun Jan 10, 2010 3:55 pm
- Location: Cowes, Isle of Wight
Re: Droplinks for Tein Super Street coilovers
I would also really want to know this as i need to buy some for mine!
Rev 1 NA to Turbo conversion!
Re: Droplinks for Tein Super Street coilovers
I copied the Tien droplinks and made my own...but they would set you back more than double the amount of the droplinks in your link.
The Shaft on the rosejoint is M10, which fits all standard and after market suspension parts for the Mr2 (that i've tried anyways...quite a few)
The Shaft on the rosejoint is M10, which fits all standard and after market suspension parts for the Mr2 (that i've tried anyways...quite a few)
Re: Droplinks for Tein Super Street coilovers
Hmm interesting how much does a pair cost out of curiousity?
Re: Droplinks for Tein Super Street coilovers
I've done some further research and according the info about the thread/shaft diameter kindly supplied by djpkins and the info from the following website...
http://www.armspluss.co.uk/SABILIZER-LINKS/mazda
... I'm convinced the 190mm front drop links from the Mazda 323/Premacy should fit onto the front set of Tein Super Streets (and possibly other Tein coilovers).
Cheapest I've found so far are these ones from the link below but can't guarantee what the quality is like but at 4 quid a link I might just give them a go:
http://www.ebay.co.uk/itm/MAZDA-323-PRE ... 4a9fc461cd
http://www.armspluss.co.uk/SABILIZER-LINKS/mazda
... I'm convinced the 190mm front drop links from the Mazda 323/Premacy should fit onto the front set of Tein Super Streets (and possibly other Tein coilovers).
Cheapest I've found so far are these ones from the link below but can't guarantee what the quality is like but at 4 quid a link I might just give them a go:
http://www.ebay.co.uk/itm/MAZDA-323-PRE ... 4a9fc461cd
Re: Droplinks for Tein Super Street coilovers
Go for it...it's only a flexible link at the end of the day. My droplinks arn't available on this forum matey, but £50 per pair was the price...expensive in comparison, considering that essentially they offer nothing more than adjustability and are servicable.
If you can get ones that fit for £4, I would deffo give them a go...and top boy for finding them, nothing more trick than finding a bit off another car to fix your own...I like gazrev1tubby's brake kit....nissan 200/300 sx/zx calipers with Mazde RX8 discs...
If you can get ones that fit for £4, I would deffo give them a go...and top boy for finding them, nothing more trick than finding a bit off another car to fix your own...I like gazrev1tubby's brake kit....nissan 200/300 sx/zx calipers with Mazde RX8 discs...
Re: Droplinks for Tein Super Street coilovers
Did you ever try the 323 links out mate? I need some Tein links for the front of mine and want to pay as little as possible.
January 2014
May 2015
Still in the garage...
..the only thing I can promise for sure is slow progress.
May 2015
just have this niggling thought that if I rip out the wiring, then the car will never get out of the garage again.
Still in the garage...
Re: Droplinks for Tein Super Street coilovers
I haven't had a go at fitting them yet (laziness on my part) but will try them this weekend assuming I can get the old ones off!
Will keep you posted.
Will keep you posted.
Re: Droplinks for Tein Super Street coilovers
I bought some anyway, can't go wrong really for a tenner. Not sure if they fit yet.....
January 2014
May 2015
Still in the garage...
..the only thing I can promise for sure is slow progress.
May 2015
just have this niggling thought that if I rip out the wiring, then the car will never get out of the garage again.
Still in the garage...
-
- Posts: 264
- Joined: Sun Jan 10, 2010 3:55 pm
- Location: Cowes, Isle of Wight
Re: Droplinks for Tein Super Street coilovers
Do post the results guys i still havent fitted mine either lol
Rev 1 NA to Turbo conversion!
Re: Droplinks for Tein Super Street coilovers
Apparently they fit perfectly
January 2014
May 2015
Still in the garage...
..the only thing I can promise for sure is slow progress.
May 2015
just have this niggling thought that if I rip out the wiring, then the car will never get out of the garage again.
Still in the garage...
Re: Droplinks for Tein Super Street coilovers
Sorry, not quite perfectly, apparently one 'bolt' needs chopping shorter at the tein end.
January 2014
May 2015
Still in the garage...
..the only thing I can promise for sure is slow progress.
May 2015
just have this niggling thought that if I rip out the wiring, then the car will never get out of the garage again.
Still in the garage...
Re: Droplinks for Tein Super Street coilovers
Just some info on these if they are the same as my teins.
I took them off a few weeks ago to find that the drop links were completely rebuildable in seperate pieces.
I broke the ball and bolt bit. Found some parts on google search with correct thread and pitch and viola! screwed it back onto the bar to the correct length and job done.
All depends if you still have the original drop links to replace the parts you need to though!
I took them off a few weeks ago to find that the drop links were completely rebuildable in seperate pieces.
I broke the ball and bolt bit. Found some parts on google search with correct thread and pitch and viola! screwed it back onto the bar to the correct length and job done.
All depends if you still have the original drop links to replace the parts you need to though!
-
- Posts: 67
- Joined: Thu Nov 03, 2011 6:16 pm
- Location: Martin, Lincolnshire
Re: Droplinks for Tein Super Street coilovers
I've fitted Premacy ones to the front of mine and they're bang on.
The bolt does sit within about 1mm of the shocker body but it doesn't foul.
Like you guys, I just did some research into what length and spec they needed to be and took the plunge which fortunately has paid off
The bolt does sit within about 1mm of the shocker body but it doesn't foul.
Like you guys, I just did some research into what length and spec they needed to be and took the plunge which fortunately has paid off
Re: Droplinks for Tein Super Street coilovers
Out of interest how did people find removing the old bolts from the front Tein shocks?
Due to the bolt being seized on and inside the bracket against the shock, did you all just cut through the bolt on the outside? If not how did you get the leverage to remove?
Due to the bolt being seized on and inside the bracket against the shock, did you all just cut through the bolt on the outside? If not how did you get the leverage to remove?
Rev 2 Turbo (Testing my patience)
Golf GTI MK5 (Competent but dull)
Golf GTI MK5 (Competent but dull)
-
- Posts: 56
- Joined: Sun Apr 08, 2012 11:47 am
- Location: Aberdeen
Re: Droplinks for Tein Super Street coilovers
Premacy droplinks definately an option then? Are the standard MR2 rear droplinks still ok to use with tein superstreets though?
Alasdair
Alasdair
Re: Droplinks for Tein Super Street coilovers
I sell custom made ones with ball jointed ends here.
http://www.ebay.co.uk/itm/200931459597? ... 1555.l2649
You can also buy them cheaper than the buy it now price in my traders thread on this forum.
http://www.ebay.co.uk/itm/200931459597? ... 1555.l2649
You can also buy them cheaper than the buy it now price in my traders thread on this forum.
dazzz wrote:I'm no expert but
Re: Droplinks for Tein Super Street coilovers
Did this with mine super street - and realised in the process I had a leak.
Standard Toyotas (I used Delphi) work fine for rear.
Mazda Premacy for front.
Standard Toyotas (I used Delphi) work fine for rear.
Mazda Premacy for front.
Rev 2 Turbo (Testing my patience)
Golf GTI MK5 (Competent but dull)
Golf GTI MK5 (Competent but dull)
-
- Posts: 469
- Joined: Sun Aug 14, 2011 6:09 pm
- Location: Chaddesley Corbett