[Mk2] [Turbo] Help needed, does anyone know what this noise is?

Anything and everything to do with mechanical issues with your Mk2

Moderators: IMOC Moderators, IMOC Committee Members

Post Reply
Bone
Posts: 298
Joined: Sun Jun 28, 2009 7:59 pm

[Mk2] [Turbo] Help needed, does anyone know what this noise is?

Post by Bone »

It is coming from the turbo area and goes away once warm.

http://youtu.be/SWoqEUpCrOE
Slarty
Posts: 4224
Joined: Thu Oct 26, 2006 3:52 pm
Location: Barking, Essex

Re: [Mk2] [Turbo] Help needed, does anyone know what this noise is?

Post by Slarty »

Sounds very much like the exhaust manifold gasket is blowing. First step is to try and get a spanner on all the nuts to check that they're tight.

It goes when warm as the manifold expands slightly to seal the gap :)
Bone
Posts: 298
Joined: Sun Jun 28, 2009 7:59 pm

Re: [Mk2] [Turbo] Help needed, does anyone know what this noise is?

Post by Bone »

It almost sounds like a belt is slipping. There is a nut missing from my downpipe.
Slarty
Posts: 4224
Joined: Thu Oct 26, 2006 3:52 pm
Location: Barking, Essex

Re: [Mk2] [Turbo] Help needed, does anyone know what this noise is?

Post by Slarty »

Bone wrote:There is a nut missing from my downpipe.


Replace that as a first port of call and I'd be pretty sure the noise will go straight away.
Bone
Posts: 298
Joined: Sun Jun 28, 2009 7:59 pm

Re: [Mk2] [Turbo] Help needed, does anyone know what this noise is?

Post by Bone »

It sounds more like the inlet side of the turbo. Could it be the turbo?
Last edited by Bone on Mon Aug 01, 2011 9:06 pm, edited 1 time in total.
Slarty
Posts: 4224
Joined: Thu Oct 26, 2006 3:52 pm
Location: Barking, Essex

Re: [Mk2] [Turbo] Help needed, does anyone know what this noise is?

Post by Slarty »

You won't know until you replace that nut ;)

Seriously, replace the nut and see where you go from there. There's no point worrying unduely until you've done that.
djpkins
Posts: 2326
Joined: Thu Apr 30, 2009 7:13 am
Location: essex

Re: [Mk2] [Turbo] Help needed, does anyone know what this noise is?

Post by djpkins »

are you sure thats not the exhaust wheel scraping the housing.
Bone
Posts: 298
Joined: Sun Jun 28, 2009 7:59 pm

Re: [Mk2] [Turbo] Help needed, does anyone know what this noise is?

Post by Bone »

That's what I thought it could be.
djpkins
Posts: 2326
Joined: Thu Apr 30, 2009 7:13 am
Location: essex

Re: [Mk2] [Turbo] Help needed, does anyone know what this noise is?

Post by djpkins »

downpipe off and have a butchers matey...better to know now though eh :thumleft:
Bone
Posts: 298
Joined: Sun Jun 28, 2009 7:59 pm

Re: [Mk2] [Turbo] Help needed, does anyone know what this noise is?

Post by Bone »

Downpipes coming off tonight. Will report back.
Bone
Posts: 298
Joined: Sun Jun 28, 2009 7:59 pm

Re: [Mk2] [Turbo] Help needed, does anyone know what this noise is?

Post by Bone »

All manifold studs are tight.

I went to remove the downpipe and found 1 nut missing, 1 nut spun loose (right at the other end of the thread) and the others weren't that tight.

I removed the downpipe and inspected and felt the exhaust turbine and all seamed O.K, spun nice and smooth and only minimal side to side play.

I then started it up! It was loud and im not sure if this sounds normal or not. Please give me your opinions. Cheers.

Toby.

http://youtu.be/6eFvmHOZ0Nw
Bone
Posts: 298
Joined: Sun Jun 28, 2009 7:59 pm

Re: [Mk2] [Turbo] Help needed, does anyone know what this noise is?

Post by Bone »

Downpipes coming off tonight. Will report back.
Steve Horrocks
Posts: 7172
Joined: Thu Dec 16, 2004 6:39 pm
Location: Oldham

Re: [Mk2] [Turbo] Help needed, does anyone know what this noise is?

Post by Steve Horrocks »

Blowing from, more than likely, exhaust manifold gasket. It's not your turbo at fault so don't worry! Are all the manifold studs tight? Also, not bottomed out on rust so feels tight. Then check turbo to manifold is tight, and turbo to downpipe.
476bhp & 415ft lb @ 1.9bar Magic by Ryan!
Gone, but never forgotten
Now with a mk1.5 & a NHB EP3
Bone
Posts: 298
Joined: Sun Jun 28, 2009 7:59 pm

Re: [Mk2] [Turbo] Help needed, does anyone know what this noise is?

Post by Bone »

Problem solved :D It was the exhaust manifold gasket as 1 stud had broken. I striped it all down and replaced 4 studs all the nuts and gaskets. She now runs sweet as a nut :thumleft:
Post Reply

Return to “Mechanical”