Dyno results from chesterfield on tuesday.

[gavinda]

Didn't get to see any of the other mr2s that ryan mapped on tuesday as i was running a little late, anyway ryan worked his magic.....



this run was at 1.6-1.7bar and i wanted to keep rev limit at 7k, we made a little more on another run when we reved higher to 7.1k think that one was 465ATW. couldnt rev higher as my wastegate was too small so we were getting boost creep over 7k and we were limited on fueling.

[Steve Horrocks]

Fantastic! Cracking set of numbers there. Love how that torque line holds steady at 420!!

[gavinda]

peak torque was 430ftlbs on that run but it just held for so long, the screen was reading whp i thought it was flywheel so when we hit 450 i was over the moon then ryan told me it was at the wheels and we were well into the 500s at the fly!!!

[craig_mr2_mk1]

Well done on the results mate. What's your spec?

[gavinda]

gt35r, forged rev2 engine cat cams, custom chargecooler 3in piping in engine bay!, ku/jun intake q45 throttlebody, light flywheel etc. etc..

[sjm1984]

Good power from the mods

I'm soon going to get mine mapped by greg @ Pro Tuner

[greeny]

Good results!

Why only revving till 7k though?

Revving out till 8-8.5k will give you a much bigger power band


Edit...Just read why you weren't revving higher

[Sideways Si]

Welcome to the 500Bhp Club !.

It's great, but it may make you feel .......

[jimGTS]

sweet

[ashley]

Woo Hoo! Bet that kicks you in the back!!

[MR2_Turbo]

Great result mate