Front wings.

[ulysess1966]

S/H wing right colour in A1 condition that will be in Mike Brewers fantasy land then and only £50

If memory serves me correctly it was less than 50 - made me laugh out loud watching that, was he working the scrap guy with strings or something?

I fitted a Toyota steel one last summer to the driver's side. The wings must come in at least 2 patterns because there was one bolt with no hole, but I just ignored that one. One thing it won't be doing any time soon is rusting due to a thorough rub down and 2 coats of Hammerite on the rear side, followed by a liberal spray of Waxoyl once it was fitted.

[cartledge_uk]

£110 for metal and will rust ones from Toyota
£85 delivered for fibreglass non rusting ones from Honeybourne

Honeybourne all the way...

£105+Vat for toyota ones now (gone up I think)

Some on the MK1 club genuinely offered me a second hand one for £110 delivered

[coanda]

You could try TCB parts. They may be able to get new ones cheaper than direct from Toyota.

[mr2mk1chick]

The wings must come in at least 2 patterns because there was one bolt with no hole, but I just ignored that one.

no bolt hole = mk1a
bolt hole = mk1b

[kevin..in]

The wings must come in at least 2 patterns because there was one bolt with no hole, but I just ignored that one.

no bolt hole = mk1a
bolt hole = mk1b

hole is for the lower front spoiler, i.e. not fitted to the earliest 1a cars, but found on later 1a's and all 1b's

[ulysess1966]

My car has the lower spoiler, so I need to bore a hole.

In my defence, I was in a hurry when I fitted the wing last summer, more time now to sort it out.

Ta.