I have for sale a 1994 rev3 turbo GTS tin top rust free shell for sale.
Perfect for an MR2 build, track car, any kind of project!
The shell is with Peter Gidden @ sbits currently. No rust on the shell, sills both solid which is a rarity, as these are a rust common place on the mk2.
Basically the sale is for the shell only, anything attached to it is free with the sale.
Any further interest, please contact myself or Peter Gidden @ sbits.
Thanks for looking, I'm after £300 for the shell, buyer to collect from south Yorkshire.
[FINALIZED] Rev3 GTS Turbo Shell for sale
Moderators: IMOC Moderators, IMOC Committee Members
Re: [FINALIZED] Rev3 GTS Turbo Shell for sale
Seen this yesterday when down at Peter's, Worth every penny..
Colour is great too, great base for a project!
GLWTS
Colour is great too, great base for a project!
GLWTS
FORGED BUILD (424hp @ hubs): http://www.imoc.co.uk/forums/viewtopic.php?t=170916
Re: [FINALIZED] Rev3 GTS Turbo Shell for sale
Sounds like a very good deal.. Out of curiosity what colour is it?
Re: [FINALIZED] Rev3 GTS Turbo Shell for sale
Gullzter wrote:Seen this yesterday when down at Peter's, Worth every penny..
Colour is great too, great base for a project!
GLWTS
Cheers fella
GeorgeL wrote:Sounds like a very good deal.. Out of curiosity what colour is it?
Hi George, shell is Goodwood Green - 6M1.
Craig
Re: [FINALIZED] Rev3 GTS Turbo Shell for sale
Some pics are going to help this.
Is it a rolling shell? If it had fiddly things like brake lines etc could suit a non expert like me.
Is it a rolling shell? If it had fiddly things like brake lines etc could suit a non expert like me.
Re: [FINALIZED] Rev3 GTS Turbo Shell for sale
aussieGT wrote:Some pics are going to help this.
Is it a rolling shell? If it had fiddly things like brake lines etc could suit a non expert like me.
I will see if Pete can send me some pics.
It isn't a rolling shell, it literally is for sale as a shell. Pete can make it into a rolling shell for trailering purposes for an hours labour.
It is much easier to state that it's a shell for sale, with anything attached to it is free as part of the sale, rather than try and describe what's missing.
Re: [FINALIZED] Rev3 GTS Turbo Shell for sale
Had a nosey at this a few times at Petes and as a result briefly considered it myself as was contemplating an entire colour change and reshell as opposed to stripping mine and storing its, it seemed easier and a lot more cost and time effective but eventually decided against it.
Very clean shell though one of the cleanest ive seen and if its around in the distant future ill reconsider it, just doesnt fit in with my plans at the moment.
GLWS
Very clean shell though one of the cleanest ive seen and if its around in the distant future ill reconsider it, just doesnt fit in with my plans at the moment.
GLWS
Re: [FINALIZED] Rev3 GTS Turbo Shell for sale
This must go within the next week, or it will be scrapped!
Shame really, as it's a great shell. Very hard to find in this condition.
Open to offers.
Shame really, as it's a great shell. Very hard to find in this condition.
Open to offers.
-
- Posts: 1844
- Joined: Sun Jan 30, 2005 1:22 pm
Re: [FINALIZED] Rev3 GTS Turbo Shell for sale
If its going to wind up going for scrap why not offer it to Patrick at Rogue? I am sure a tin top shell would be useful for his track cars should the worst happen to one of them.
Re: [FINALIZED] Rev3 GTS Turbo Shell for sale
slipping clutch wrote:If its going to wind up going for scrap why not offer it to Patrick at Rogue? I am sure a tin top shell would be useful for his track cars should the worst happen to one of them.
I did mate, I replied to a wanted post of his, but he never replied so assumed he didn't want it.
Re: [FINALIZED] Rev3 GTS Turbo Shell for sale
Craig.. Do you have any photos of it at all mate?
-
- Posts: 1844
- Joined: Sun Jan 30, 2005 1:22 pm
Re: [FINALIZED] Rev3 GTS Turbo Shell for sale
GeorgeL wrote:Craig.. Do you have any photos of it at all mate?
There are some photos of the complete car in off topic - last years Lemans trip. Hope that helps
Re: [FINALIZED] Rev3 GTS Turbo Shell for sale
GeorgeL wrote:Craig.. Do you have any photos of it at all mate?
Hi George,
Only these ones mate:
Pics show bits that have been since removed, the sale is for the shell only, and any bits still attached are free with sale.
Hope that helps bud.
Craig
-
- Posts: 1844
- Joined: Sun Jan 30, 2005 1:22 pm
Re: [FINALIZED] Rev3 GTS Turbo Shell for sale
Momo steering wheel going with the shell Craig ? nice little bonus for someone if it is.
Re: [FINALIZED] Rev3 GTS Turbo Shell for sale
slipping clutch wrote:Momo steering wheel going with the shell Craig ? nice little bonus for someone if it is.
No mate, that's gone. It's now in the T bar.
Re: [FINALIZED] Rev3 GTS Turbo Shell for sale
Smashing guys thanks for that 👍 just had a look there.
Do you still have log book for it?
Do you still have log book for it?
Re: [FINALIZED] Rev3 GTS Turbo Shell for sale
GeorgeL wrote:Smashing guys thanks for that 👍 just had a look there.
Do you still have log book for it?
No bother mate, yes I have the V5.
It's even MOT'd till August.
Re: [FINALIZED] Rev3 GTS Turbo Shell for sale
Hi Craig,
Apologies on the delayed reply.. I'd have taken this from you but after speaking to my old man we just don't have the space for it to be dry stored up here and I wouldn't have it sitting outside given it's rust free.
If anything comes up which allows me to dry store it I'll let you know right away.
Sorry if You feel I've wasted your time with regards to posting photos etc
George
Apologies on the delayed reply.. I'd have taken this from you but after speaking to my old man we just don't have the space for it to be dry stored up here and I wouldn't have it sitting outside given it's rust free.
If anything comes up which allows me to dry store it I'll let you know right away.
Sorry if You feel I've wasted your time with regards to posting photos etc
George
Re: [FINALIZED] Rev3 GTS Turbo Shell for sale
Does it have major parts like the cross member and front struts left on it?
Re: [FINALIZED] Rev3 GTS Turbo Shell for sale
GeorgeL wrote:Hi Craig,
Apologies on the delayed reply.. I'd have taken this from you but after speaking to my old man we just don't have the space for it to be dry stored up here and I wouldn't have it sitting outside given it's rust free.
If anything comes up which allows me to dry store it I'll let you know right away.
Sorry if You feel I've wasted your time with regards to posting photos etc
George
No worries mate, as the car is taking up a bay in Pete's workshop, I've said to Pete, that if the shell isn't bought by the end of this week, to arrange for it to be scrapped.
It will be a shame, but I don't want the shell to be stopping Pete having paying work in the workshop.
cheers
Craig