1994 MR2 Rev3 NA Tin Top, Cobra exhaust, polybushed, 4 wheel aligned, long mot
Moderators: IMOC Moderators, IMOC Committee Members
-
- Posts: 63
- Joined: Tue Feb 28, 2012 3:29 pm
1994 MR2 Rev3 NA Tin Top, Cobra exhaust, polybushed, 4 wheel aligned, long mot
Car is in Northumberland.
Price: £1000
This is a tin-top model which means it's lighter than sunroof/t-bar and also more rigid.
The current spec is:
- Lightweight custom Cobra stainless steel race exhaust with Decat (fine for MOT due to age and import). Double exit, 3 inch tips I also have the standard backbox for quiet track days (e.g. Croft @ 88db).
- Powerflex polybushed all round.
- Front adjustable caster Tie rods (from a rev1, these are not standard!)
- Good condition standard rev3 wheels with tyres that have lots of tread left.
- 4 wheel alignment set up for "fast road use" by AK automotive
- Interior is in good condition.
- Clear sidelights
Servicing:
- Replaced alternator
- New rear discs and pads
- Replaced rear caliper
- Polybushing
- 4 wheel alignment
- Adjustable tie rods
- Replaced rear suspension arms
- Rust proofing on sills and arches
Spares:
- Standard exhaust
Other:
- 120000 miles but engine is still strong, most suspension components have been replaced over the years and are in good condition. Recent compression test showed 180 across all 4 cylinders.
- HPI clear
- 3 previous owners (I was told the 2nd previous owner was a lady who mainly did motorway miles when I bought it)
- Imported 2000
- 10 months MOT
- Tax till end of November
Drop me a message for further info/phone number (don't want to put it up on the web).
It currently has a private number plate (not included in sale) which I'll transfer off at sale.
Freshly rust proofed and painted sills:
Interior in great condition. Also have some MR2 floor mats inc. in sale.
Freshly painted rev3 wheels.
Price: £1000
This is a tin-top model which means it's lighter than sunroof/t-bar and also more rigid.
The current spec is:
- Lightweight custom Cobra stainless steel race exhaust with Decat (fine for MOT due to age and import). Double exit, 3 inch tips I also have the standard backbox for quiet track days (e.g. Croft @ 88db).
- Powerflex polybushed all round.
- Front adjustable caster Tie rods (from a rev1, these are not standard!)
- Good condition standard rev3 wheels with tyres that have lots of tread left.
- 4 wheel alignment set up for "fast road use" by AK automotive
- Interior is in good condition.
- Clear sidelights
Servicing:
- Replaced alternator
- New rear discs and pads
- Replaced rear caliper
- Polybushing
- 4 wheel alignment
- Adjustable tie rods
- Replaced rear suspension arms
- Rust proofing on sills and arches
Spares:
- Standard exhaust
Other:
- 120000 miles but engine is still strong, most suspension components have been replaced over the years and are in good condition. Recent compression test showed 180 across all 4 cylinders.
- HPI clear
- 3 previous owners (I was told the 2nd previous owner was a lady who mainly did motorway miles when I bought it)
- Imported 2000
- 10 months MOT
- Tax till end of November
Drop me a message for further info/phone number (don't want to put it up on the web).
It currently has a private number plate (not included in sale) which I'll transfer off at sale.
Freshly rust proofed and painted sills:
Interior in great condition. Also have some MR2 floor mats inc. in sale.
Freshly painted rev3 wheels.
Last edited by bicycleshorts on Thu Nov 22, 2012 10:11 am, edited 35 times in total.
-
- Posts: 63
- Joined: Tue Feb 28, 2012 3:29 pm
Re: 1994 MR2 Rev3 NA Tin Top, Cobra exhaust, polybushed, 4 wheel aligned, long mot
Had some interest in this but nothing solid. Will listen to offers and happy to drive (within reason!) since it's MOT'd and Taxed.
-
- Posts: 63
- Joined: Tue Feb 28, 2012 3:29 pm
Re: 1994 MR2 Rev3 NA Tin Top, Cobra exhaust, polybushed, 4 wheel aligned, long mot
Giving this one last bump before bits are coming off it (exhaust, wheels/tyres, ARBs, seat and adjustable tie rods) and it'll be sold stock locally.
-
- Posts: 63
- Joined: Tue Feb 28, 2012 3:29 pm
-
- Posts: 63
- Joined: Tue Feb 28, 2012 3:29 pm
Re: 1994 MR2 Rev3 NA Tin Top, Cobra exhaust, polybushed, 4 wheel aligned, long mot
Bump for new pics... I managed to wash and polish it before the rain came.
Just not get pictures hence it's wet and in an underground car park.
Just not get pictures hence it's wet and in an underground car park.
Re: 1994 MR2 Rev3 NA Tin Top, Cobra exhaust, polybushed, 4 wheel aligned, long mot
I'd be interested in the whiteline anti roll bars if you decide to sell them
-
- Posts: 63
- Joined: Tue Feb 28, 2012 3:29 pm
Re: 1994 MR2 Rev3 NA Tin Top, Cobra exhaust, polybushed, 4 wheel aligned, long mot
Bunta wrote:I'd be interested in the whiteline anti roll bars if you decide to sell them
http://www.imoc.co.uk/forums/viewtopic.php?t=165855
-
- Posts: 63
- Joined: Tue Feb 28, 2012 3:29 pm
Re: 1994 MR2 Rev3 NA Tin Top, Cobra exhaust, polybushed, 4 wheel aligned, long mot
ARBs gone. Price dropped.
Last edited by bicycleshorts on Wed Oct 10, 2012 1:29 pm, edited 1 time in total.
-
- Posts: 63
- Joined: Tue Feb 28, 2012 3:29 pm
Re: 1994 MR2 Rev3 NA Tin Top, Cobra exhaust, polybushed, 4 wheel aligned, long mot
Wheels gone, price dropped again.
-
- Posts: 2238
- Joined: Wed Nov 28, 2007 7:08 pm
- Location: Birmingham
- Contact:
Re: 1994 MR2 Rev3 NA Tin Top, Cobra exhaust, polybushed, 4 wheel aligned, long mot
I would put all the interior back in and you might find it selling quicker. Few people want a stripped out car.
-
- Posts: 63
- Joined: Tue Feb 28, 2012 3:29 pm
Re: 1994 MR2 Rev3 NA Tin Top, Cobra exhaust, polybushed, 4 wheel aligned, long mot
alanmr2turbo wrote:I would put all the interior back in and you might find it selling quicker. Few people want a stripped out car.
That's this weekends job. Going to get the carpets hoovered up and put back in.
Thanks for the comment
-
- Posts: 63
- Joined: Tue Feb 28, 2012 3:29 pm
Re: 1994 MR2 Rev3 NA Tin Top, Cobra exhaust, polybushed, 4 wheel aligned, long mot
Price drop
Bucket seat out and carpet etc. back in. We've also rust proofed the sills.
Now a very capable NA, with a nice exhaust, 4 wheel alignment and fully polybushed.
Bucket seat out and carpet etc. back in. We've also rust proofed the sills.
Now a very capable NA, with a nice exhaust, 4 wheel alignment and fully polybushed.
Re: 1994 MR2 Rev3 NA Tin Top, Cobra exhaust, polybushed, 4 wheel aligned, long mot
Is the car back in edinburgh anytime soon mate? Any rust on it?
Cheers
Cheers
-
- Posts: 63
- Joined: Tue Feb 28, 2012 3:29 pm
Re: 1994 MR2 Rev3 NA Tin Top, Cobra exhaust, polybushed, 4 wheel aligned, long mot
sam1176uk wrote:Is the car back in edinburgh anytime soon mate? Any rust on it?
Cheers
Dah, it was in Edinburgh for the last 2 months! Lol
I'd suggest I send you lots of pics/discuss on phone and if you want it the train down is only a tenner? Nice drive back up as well on the A697!
-
- Posts: 63
- Joined: Tue Feb 28, 2012 3:29 pm
Re: 1994 MR2 Rev3 NA Tin Top, Cobra exhaust, polybushed, 4 wheel aligned, long mot
Interior back in. It was given a thorough clean so looks great now.
Sills have also been rust proofed and painted.
Sills have also been rust proofed and painted.
-
- Posts: 63
- Joined: Tue Feb 28, 2012 3:29 pm
Re: 1994 MR2 Rev3 NA Tin Top, Cobra exhaust, polybushed, 4 wheel aligned, long mot
Bump. Last month of tax. If it doesn't sell it'll be going in my garage to be dry stored over winter
Re: 1994 MR2 Rev3 NA Tin Top, Cobra exhaust, polybushed, 4 wheel aligned, long mot
Whats up with the rusty bits in the exhaust pic? is that a heat-shield or the boot floor?!
-
- Posts: 63
- Joined: Tue Feb 28, 2012 3:29 pm
Re: 1994 MR2 Rev3 NA Tin Top, Cobra exhaust, polybushed, 4 wheel aligned, long mot
willber wrote:Whats up with the rusty bits in the exhaust pic? is that a heat-shield or the boot floor?!
Heat shield. It's about 1mm thick...
-
- Posts: 63
- Joined: Tue Feb 28, 2012 3:29 pm
Re: 1994 MR2 Rev3 NA Tin Top, Cobra exhaust, polybushed, 4 wheel aligned, long mot
Price dropped.
Last month of tax. After that it's coming back up to Edinburgh and being dry stored in my garage over winter.
If anyone's interested I can get the car up to Edinburgh before the tax runs out for a viewing.
Last month of tax. After that it's coming back up to Edinburgh and being dry stored in my garage over winter.
If anyone's interested I can get the car up to Edinburgh before the tax runs out for a viewing.
-
- Posts: 63
- Joined: Tue Feb 28, 2012 3:29 pm
Re: 1994 MR2 Rev3 NA Tin Top, Cobra exhaust, polybushed, 4 wheel aligned, long mot
One week of tax left. Car at a grand.
Someone come and buy this so it doesn't have to live in my garage over winter
Someone come and buy this so it doesn't have to live in my garage over winter