[Mk2] [NA] Omex + throttlebodys

[David-Edmond]

Just wondering has anyone tried going down the omex route with throttle body's on the mk2 mr2 .
Done a bit of research not much but havent found anyone do it so far, surley someone must have?

[RobPhoboS]

Wish there was an off the shelf solution, all of the threads I've looked at in the past seemed to suggest it's a fabrication only job.
If so...

GROUP BUY

[Peter Gidden]

Plenty of research been done. Need to spend 2K+ to achieve an engine fit only for race track.

If you want 200BHP of N/A useful on the road, fit a BEAMS engine.

[David-Edmond]

Apparently if you get the right inlet manifold it would be a straightforward job doing it.

[Peter Gidden]

I don't disagree. Not that i've ever seen "the right inlet manifold" yet.

Then you'll need an ECU, cams etc.

[David-Edmond]

Think ill need to do a bit more research into it. This is a future plan so no rush

[madbasshunter]

Best speak to Red http://www.imoc.co.uk/forums/profile.ph ... le&u=13113 as he has throttle bodies on his albeit with a beams engine.
http://www.mr2oc.co.uk/forums/125/143003.html
http://www.mr2oc.co.uk/forums/125/147486.html

[Peter Gidden]

Best speak to Red http://www.imoc.co.uk/forums/profile.ph ... le&u=13113 as he has throttle bodies on his albeit with a beams engine.

Yep, he used 4A-GE Blacktop throttle bodies fitted to a custom inlet manifold adapted for the BEAMS engine. And Link ECU IIRC.

[bolton]

Just transplant a turbo lump!