1994 rev3 tintop GT TURBO. project

MR2s for sale - all versions & variants

Moderators: IMOC Moderators, IMOC Committee Members

Post Reply
scotty1982
Posts: 395
Joined: Fri Aug 14, 2009 10:52 pm
Location: cambridge

1994 rev3 tintop GT TURBO. project

Post by scotty1982 »

It pains me to say after many months trying to find a way around it i have now got to sell my much loved 2. The only reason im selling is im getting divorced and have to move out in 2 to 3 weeks. With the expence of finding my own place and everything that goes with it i will just never be able to afford to complete my pride and joy.

History..

I bought the car 18 months ago and used it every day for about 6 months untill the front shock and topmount died. In that time i bought and fitted a decat pipe and blitz air filter and added oil temp, oil pressure and boost gauge. I also gave it an oil and filter change 2K ago. I then took it off the road and put it in the garage. Then i started moddifying it. I replaced the topmount and all shocks for black billies and 30mm apex springs.

The car and parts fitted

1994 rev3 GT Turbo
78,000 miles
MOT till September 2011
currently SORN
Black billies and 30mm apex springs
complete border kit fitted
18" OZ PL CLASSE alloy wheels 18x8 front 18x9 rear
Tyres, 225 front and 255 rear all with good tread left
Rare bomex electric mirrors
Rare recaro seats trimmed in blue cream leather with door cards and cubby box
Oil temp, oil pressure and boost gauges mounted in dash
Referbed the wheels at a cost of £550 in december!
PROF. sheepdog exhaust
Decat pipe
MOMO steering wheel and boss
Driftworks internal spline wheel nuts and locking nuts
Blitz air filter
Drift style spoiler
Fiberglass border bonnet (believed to be carbon wrapped)
Uk clocks with red led backlight
Moddified side vents
UK front rub strips
Blitz turbo timer
Forge bov
replaced plugs, dizzy cap and arm, leads
Less then 50 miles covered since mot!


Parts still to be fitted which will go with the car

Hks boost controller
fiberglass border bonnet
Braded brake lines
Quad headlights
Powdercoated intake manifold
caliper rebuild kit (rear nearside needs doing)
Cambelt, waterpump and pullys + fuel filter ( being done next week)

Spares to go with the car

Original bonnet
passanger side original elec folding mirror
rev3 spoiler
Stock bov
Standard springs
jap clocks with white dials
front passanger wing (one on car has slight dent)
Rust free Passanger door (rust on bottom of original)

I have replaced the rockercover gasgets, dizzy shaft O ring and any other gasgets along the way i came to.


Engine cover is missing as i was going to get an ask sport one but ill try and get hold of one asap.


There is so much i would of forgotten about but ill update when i remember! This car has been my whole life for 18 months and cost me a small fortune. The main thing left to do is get it sprayed

I would like £3500, this pains me so much to have to sell my pride and joy but i have no choice any more.


Any questions please ask. Pm me or call on 07881 956 808. Scott

I have lots and lots of pics for when i got the car, through stages and parts to how it is now

From this

Image

To this

Image

Image

Image

Image


Image

THEN
Image

NOW
Image

Image

Image
Last edited by scotty1982 on Thu Feb 24, 2011 11:01 am, edited 3 times in total.
scotty1982
Posts: 395
Joined: Fri Aug 14, 2009 10:52 pm
Location: cambridge

Re: 1994 rev3 tintop GT TURBO. project

Post by scotty1982 »

More pics added and parts i had forgotten!
Dan89
Posts: 214
Joined: Thu Sep 16, 2010 8:13 pm
Location: Suffolk

Re: 1994 rev3 tintop GT TURBO. project

Post by Dan89 »

Ah what a xxxxx, sorry to hear about this Scott, such a lovely car. :( best of luck with the sale mate.
Steve-O 2007
Posts: 6233
Joined: Sun Nov 12, 2006 1:54 pm

Re: 1994 rev3 tintop GT TURBO. project

Post by Steve-O 2007 »

damn :( if you decide to sell the rear spoiler / boot let me know :thumleft:
scotty1982
Posts: 395
Joined: Fri Aug 14, 2009 10:52 pm
Location: cambridge

Re: 1994 rev3 tintop GT TURBO. project

Post by scotty1982 »

Dan89 wrote:Ah what a xxxxx, sorry to hear about this Scott, such a lovely car. :( best of luck with the sale mate.


Tell me about it! I love this car so much it is killing me just to advertise it, even more so as I'm still working on it most days
scotty1982
Posts: 395
Joined: Fri Aug 14, 2009 10:52 pm
Location: cambridge

Re: 1994 rev3 tintop GT TURBO. project

Post by scotty1982 »

To be honest stevo I really don't think I could butcher my baby!
philster_d
Posts: 589
Joined: Fri Jan 28, 2005 3:33 pm
Location: Surrey

Re: 1994 rev3 tintop GT TURBO. project

Post by philster_d »

If only I had a job at the moment. :(
oddshoes
Posts: 1711
Joined: Thu Oct 19, 2006 9:36 pm
Location: Aylesbury

Re: 1994 rev3 tintop GT TURBO. project

Post by oddshoes »

did you sell the previous side skirts in the end? If not I am interested if you stil have them feel free to drop me a PM

Dave :D
Post Reply

Return to “MR2s for Sale”