Where's an "uninterrupted intake manifold pressure source"?

[bluesmoke]

Need to attach one of my boost controller's solenoid ports to an "uninterrupted intake manifold pressure source".

Well where's that

I've already tapped into the pipe from the turbo pressure sensor for a boost gauge so would sooner use another location.

Can I use one of the hoses on top of the inlet, near the twin entry turbo plaque?

[Steve-O 2007]

use the pipe that comes off your Turbo to the actuator

--edit-- hang on, are we talking Solenoid port as in one of the ports that control the actuator / wastegate or a Boost pressure sensor port?

[I am Spartacus]

Use the pipe on the fpr

[bluesmoke]

I'm talking about the boost controller solenoid.

Could you provide a photo of the pipe you mean guys? I'd be gutted if I chopped into the wrong one!

[bluesmoke]

Bump

[Steve-O 2007]

what make boost controller is it?

Is there 2 big ports (solenoid ports) and 1 smaller port on the unit ?

[bluesmoke]

HKS EVC IV. There's 3 ports, I know one has a 4mm hose, one has 6mm and not sire about the other.

It's only the 4mm one I wasn't sure about but I think I'm going to connect to the hose coming off the BOV.