[Mk2] [Turbo] Uprated Engine Mounts - Confirmed size for Rev 3 Powerflex

[Scott Barton]

Bit of confusion on what engine mounts suit what car....

I have a 1994 Rev 3 Turbo and can confirm that the sizes needed are as follows:

1 x Powerflex PFR76-308 Rear Engine mount-lower, front bush 79mm OD bush

1 x Powerflex PFR76-309 Rear Engine mount-lower, rear bush 79mm OD bush


From what i can gather,
Rev 1/2 = 73mm OD
Rev 3/4 = 79mm OD
Rev 5 = 83.5mm OD

http://www.powerflex.co.uk/products/MR2 ... 233/1.html

Hope this helps someone in the future.

[RyanRs]

Scott, just looking at the suspension bushes on that link, it says (for example) 'Qty per car: 2 ' It obv means that there is 2 on the car but does that also mean they supply 2? or do you have to order two of them?

[Scott Barton]

Not sure mate, i only ordered the engine mounts.

[auzzam]

Can anyone else confirm its 79mm for the front mount?

I'm going to be taking my car to my uncles garage on the weekend and am hoping to get the polyurethane inserts ordered before then.

Thanks

[gnzyza]

Nope, both mine were 83.5mm , and different size bolt/sleeve holes which power flex didn't do, so the custom made one for me. . Only real way is measure it to be sure, a bit of a lottery.