[All] [Generic] How to stop crystal clear lenses falling out?

[Razor04]

Hi has anyone got any tips on keeping the crystal clear lenses in the front bumper? just fitted a pair but 1 seems to wanna rattle lose a bit. any info?

[craig]

Tie wraps are your friend

[skipp123]

paid £60 for a new set stuck them in without connecting them went for a drive, pulled into the garage found i only had x1 left lol

bit of luck a mates dad had a set from aaaages ago so gave me them as a pressie

[splintermcinnes]

fit them, correctly!!

took alot for mine to click into place, had to put one hand up the back of the bumper to stop it flexing so it could click into position. once there there are solid!

[Razor04]

Tie wraps are your friend

What do you do with the tie wraps man?

[Greddy-Matt]

With most of the clear lenses you can wind in/out the metal locating pin on the back to take up some of the slack and get them to locate tightly, however I would recommend using tie wraps or similar on the plastic clip the reflector sits into to when they're fitted to stop it popping out under tension.

You can gain access from underneath the car or behind wheel arche liners

[Tiny]

Mine were loose bolt the min properly and re use the Toyota bolts and the toyota Male part from the original reflectors as its a chunkier part and wont fall out. I lost one and found it again changed the push pin for the toyota one and its solid and doesnt even wobble now