Hi Rob,

Honestly, it's a really easy 10 minute job to do and you only need a philips scredriver and a 10mm long socket.

There are only 2 or 3

(while since I last swapped mine) bolts holding the window at the bottom and only 4 screws to remove to get the door card off, once you see inside you'll notice the problem straight off.

Going to Mr T will of course be expensive and if the tracks are bent damaged etc, ones from scrapped cars are cheap whereas they'll want to fit new ones.

It has more than likely just come off the runner, and will just need slotting back.

Give it a go

Marc

Marc