[Mk2] [Turbo] closer final ratio - new question

Anything and everything to do with mechanical issues with your Mk2

Moderators: IMOC Moderators, IMOC Committee Members

Post Reply
kevinTurboFR
Posts: 45
Joined: Tue Aug 26, 2008 12:02 am

[Mk2] [Turbo] closer final ratio - new question

Post by kevinTurboFR »

Hi!

i want to use my mr2 on a track, but i think the gearbox is too long!
i compared with a friend running on a celica turbo with a N/A gearbox, and he as really shorter gear than me, so i'm looking for a shorter ratio for my rev3 Turbo, but not like the rev1/2 gearbox or n/a gearbox.

does anyone know if (and where) i can buy a final ratio shorter for rev3 gearbox ?
Last edited by kevinTurboFR on Wed Jan 14, 2009 1:12 pm, edited 1 time in total.
kevinTurboFR
Posts: 45
Joined: Tue Aug 26, 2008 12:02 am

Re: [Mk2] [Turbo] closer final ratio - new question

Post by kevinTurboFR »

no one find a closer gear ratio for 3sgte gearbox?

i look for
TRD
OS GIKEN
TOMEI
HKS
... i find nothing... :cry: i ll swap my 3sgte for a 4age... there is so much gearbox parts for this engine....
kevinTurboFR
Posts: 45
Joined: Tue Aug 26, 2008 12:02 am

Re: [Mk2] [Turbo] closer final ratio - new question

Post by kevinTurboFR »

i take a look on gear ratio, and finally, the best "stock" gearbox should be an NA gearbox with a TURBO final ratio. but, my question is, if i keep my gen3 turbo gearbox and my final ratio, and put in, an internal gear ratio from a NA, will i have to change my clutch and flywheel too or i can keep my TURBO clutch/flywheel?
megatart
Posts: 261
Joined: Thu Aug 11, 2005 4:23 am
Location: Mancyland

Re: [Mk2] [Turbo] closer final ratio - new question

Post by megatart »

Thought i remembered seeing one. Check out link below.


http://www.rhdjapan.com/jdm-low/C-ONE-S ... -MR2-52476
Post Reply

Return to “Mechanical”