In the beginning of next month i can delever this new sets TRD look strutbars,completes sets ,that means front + rear strutbar . can not sell them apart !! most buy them also in this sets only.
Color will by the same like TRD .
The prices for this complete set will by arround £ 157 - £175 incl ship.
Is there somone intrested ,put your name on the list below.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Best regards Eddy
Strutbars TRD look complete sets
Moderators: IMOC Moderators, IMOC Committee Members
Strutbars TRD look complete sets
Last edited by mr2eddy on Thu Mar 20, 2008 7:27 pm, edited 1 time in total.
-
- Posts: 2219
- Joined: Thu Feb 23, 2006 10:48 pm
- Location: Newcastle
Re: Strutbars TRD look complete sets
Had to drop out with my new turbo kit the rear bar will not clear
Last edited by Leakie Tbar on Fri Mar 21, 2008 5:33 pm, edited 1 time in total.
-
- Posts: 423
- Joined: Thu Dec 16, 2004 10:40 pm
- Location: District 9
Re: Strutbars TRD look complete sets
Hi eddy may be interested........if you do a group sell say more than 5 or more than ten.....can you give us a more competive price....like say 35% off.......also what can you tell us of the contruction....of the bar.and what materail is it made of.........the one in the pics looks like its all be welded together.......thanks carl..............
also if i was to buy these looking like the oringinals.......can you supply so stickers that are heat resistant to go on the bars.........
also if i was to buy these looking like the oringinals.......can you supply so stickers that are heat resistant to go on the bars.........
Re: Strutbars TRD look complete sets
1. Leakie Tbar (Kev)
2. Quigonjay
3.
4.
5.
6.
7.
8.
9.
10.
2. Quigonjay
3.
4.
5.
6.
7.
8.
9.
10.
Re: Strutbars TRD look complete sets
if only it would fit under my turbo
Re: Strutbars TRD look complete sets
agentturbo wrote:Hi eddy may be interested........if you do a group sell say more than 5 or more than ten.....can you give us a more competive price....like say 35% off.......also what can you tell us of the contruction....of the bar.and what materail is it made of.........the one in the pics looks like its all be welded together.......thanks carl..............
also if i was to buy these looking like the oringinals.......can you supply so stickers that are heat resistant to go on the bars.........
This is a very low prices for a complete set ,its absolute the min price.
Re: Strutbars TRD look complete sets
Damn, that's annoying!
This is one of those things that everyone would have, if it wasn't for the fact we probably already own aftermarket struts
This is one of those things that everyone would have, if it wasn't for the fact we probably already own aftermarket struts
Re: Strutbars TRD look complete sets
hi, what material are these made from? do you have any pictures to show the quality of the finish?
dave
dave
-
- Posts: 423
- Joined: Thu Dec 16, 2004 10:40 pm
- Location: District 9
Re: Strutbars TRD look complete sets
okay . if you say they would look just like the genuine ones add me to the list.....can you explain the strutts composites in more detail.....would they fit also if i was to have a charge cooler fitted ?
Re: Strutbars TRD look complete sets
Dont hold me to it, but I dont think these fit with the chargecooler. The other thing you have to be careful with is aftermarket ic's.
The GENUINE TRD Brace catches on the pipe to the throttle body, when fitted with Berk, Greedy, EMSPowered, etc aftermarket intercoolers.
There is now available a one piece pipe that has been specifically designed to allow the TRD brace to fit with aftermarket IC's......and its a good piece of work that gives plenty of clearance.
If you want any pics, I can stick one up.
As for the material of this brace....... dont know what it is, or what the TRD is, but the TRD Brace weighs a ton (not literally)
Graeme
The GENUINE TRD Brace catches on the pipe to the throttle body, when fitted with Berk, Greedy, EMSPowered, etc aftermarket intercoolers.
There is now available a one piece pipe that has been specifically designed to allow the TRD brace to fit with aftermarket IC's......and its a good piece of work that gives plenty of clearance.
If you want any pics, I can stick one up.
As for the material of this brace....... dont know what it is, or what the TRD is, but the TRD Brace weighs a ton (not literally)
Graeme
Berk Tech IC, Berk Tech Downpipe, Berk Tech Exhaust, ARC Induction System, DevilsOwn Water/Meth Injection (Pre & Post turbo). TRD Cold Pipe, EMS Powered Digital Boost Gauge, TRD Strut Braces, Innovate O2, Blitz SBC i-color EBC - "ARCH ROLLER FOR HIRE"
-
- Posts: 2230
- Joined: Wed Dec 15, 2004 3:08 pm
- Location: Stourbridge
Re: Strutbars TRD look complete sets
gtech wrote:
There is now available a one piece pipe that has been specifically designed to allow the TRD brace to fit with aftermarket IC's......and its a good piece of work that gives plenty of clearance.
If you want any pics, I can stick one up.
Graeme
Please, id like to see it befor i put my name down for these
450wbhp comming soon
Re: Strutbars TRD look complete sets
all the info on the custom pipe and pictures are to be found here:
http://emspowered.com/storefront/index. ... cts_id=180
Excellent site, and safe buying from them, excellent trader
Graeme
http://emspowered.com/storefront/index. ... cts_id=180
Excellent site, and safe buying from them, excellent trader
Graeme
Berk Tech IC, Berk Tech Downpipe, Berk Tech Exhaust, ARC Induction System, DevilsOwn Water/Meth Injection (Pre & Post turbo). TRD Cold Pipe, EMS Powered Digital Boost Gauge, TRD Strut Braces, Innovate O2, Blitz SBC i-color EBC - "ARCH ROLLER FOR HIRE"
Re: Strutbars TRD look complete sets
gtech wrote:all the info on the custom pipe and pictures are to be found here:
http://emspowered.com/storefront/index. ... cts_id=180
Excellent site, and safe buying from them, excellent trader
Graeme
I work togheter with baktasht (Emspowered ) will get in a couples weeks 10 sets from this special cold pipes for extra fitting with aftermarket intercoolers.
My struts are make from Aluminium ,2 extra bolts for fit the frontbar are incl .
the struts will by painted / power coated ,almost same color TRD
Eddy
-
- Posts: 2230
- Joined: Wed Dec 15, 2004 3:08 pm
- Location: Stourbridge
Re: Strutbars TRD look complete sets
1. Leakie Tbar (Kev)
2. Quigonjay
3. redeye32uk
4.
5.
6.
7.
8.
9.
10.
2. Quigonjay
3. redeye32uk
4.
5.
6.
7.
8.
9.
10.
450wbhp comming soon
Re: Strutbars TRD look complete sets
im just wondering how this group buy is going as may be interested
do they fit straight on
do they fit straight on
Re: Strutbars TRD look complete sets
hiya is this group buy still open and if so when is the cut off date to get your name down, thanks, jim
Re: Strutbars TRD look complete sets
Will close the GB on 15 March.
Bes regards Eddy
Bes regards Eddy
-
- Posts: 2230
- Joined: Wed Dec 15, 2004 3:08 pm
- Location: Stourbridge
Re: Strutbars TRD look complete sets
mr2eddy wrote:
I work togheter with baktasht (Emspowered ) will get in a couples weeks 10 sets from this special cold pipes for extra fitting with aftermarket intercoolers.
Eddy
Do these fit the rev 3 as the throttle bodies sit 1" farther out than the rev 2 shown?
450wbhp comming soon
Re: Strutbars TRD look complete sets
redeye32uk wrote:mr2eddy wrote:
I work togheter with baktasht (Emspowered ) will get in a couples weeks 10 sets from this special cold pipes for extra fitting with aftermarket intercoolers.
Eddy
Do these fit the rev 3 as the throttle bodies sit 1" farther out than the rev 2 shown?
Yes ,i will have them for Rev 3 and Rev 2 ,thy are a little bith different,
by order from this coldpipe ,please give type from your mister ,REV3 or REV2 engine
Re: Strutbars TRD look complete sets
can we order the pipe at the same time/when the group buy closes?
how much are they for rev3?
cheers
jay
how much are they for rev3?
cheers
jay