Perspex Spoiler Logo

[KD88]

Is the Toyota logo on the rear window spoiler original equipment and does anyone know where I might get one.



These are photo's of the logo that Tommy Ogle (user name coverco) has made for us. Excellent work and very good price. Highly recommended.
Thanks Tommy.

[SuperRedMR2]

usually at a scrapyard or check ebay think there is one on there now and yes its original

[KD88]

Just the logo.

[jimi]

Just the logo.

The only place you might get one is Mr T, if they are still available.

[kaiowas]

Don't think the logo was ever available seperately, only way to replace it will be to get a complete spoiler from a breaker.

[crazylegs]

some spoilers came minus the logo so i think they were available seperately in the early years. if you need a spoiler let me know i have a few. i chucked 10 away only last week.

[SuperRedMR2]

Call Toyota, but be sitting down when they tell you how much

[GaryR]

Mine's missing the logo, I figured someone had just removed the sticker.....

[crazylegs]

no you just have the `rare` version.

[coverco]

You can get vinyl grapics cut to any design to go on your spoiler. The original lettering is quite easy to remove.

If you are putting them on the inside remember they need to be cut in reverse

[mr2mk1chick]

no you just have the `rare` version.

quite a few peeps do remove the sticker...
I am doing just that for our track car.

I would just get another whole spoiler and bolt it in place - easier

[MartG]

I am doing just that for our track car.

Saves 3g apparently

[mr2mk1chick]

I am doing just that for our track car.

Saves 3g apparently

LOL

[coverco]

no you just have the `rare` version.

I would just get another whole spoiler and bolt it in place - easier

To replace the rear window spoiler you have to remove the interior light and aluminium trim (6 screws), then use a long reach 8mm socket to remove the 5 nuts holding on the outer trim. Then you have to unscrew the top screws in the outer plastic trim. Replacement is the reverse.

To put on a sticker you clean the rear of the spoiler, mark where it goes, peel off the transfer film and stick on.

I know which I would do

[terry0769]

just spotted on e-bay hope this is what you want

http://cgi.ebay.co.uk/TOYOTA-MR2-MK1-UP ... dZViewItem

[coverco]

just spotted on e-bay hope this is what you want

http://cgi.ebay.co.uk/TOYOTA-MR2-MK1-UP ... dZViewItem

Check out this sellers other items. They have broken a MK1 and are selling the bits, £375 for a 4age engine, £250 for the gearbox

[jimi]

just spotted on e-bay hope this is what you want

http://cgi.ebay.co.uk/TOYOTA-MR2-MK1-UPPER-REAR-
SPOILER-CLEAR-TOYOTA-BODY-KIT_W0QQitemZ160208190975QQihZ006QQcategoryZ10428QQrdZ1QQssPageName
ZWD1VQQ_trksidZp1638.m118.l1247QQcmdZViewItem

I'd be careful of that one, looks like the metal tabs on the top are missing. They get broken off by people who don't know how to remove the visor ( see Tommy's post)
Jimi

[coverco]

just spotted on e-bay hope this is what you want

http://cgi.ebay.co.uk/TOYOTA-MR2-MK1-UPPER-REAR-
SPOILER-CLEAR-TOYOTA-BODY-KIT_W0QQitemZ160208190975QQihZ006QQcategoryZ10428QQrdZ1QQssPageName
ZWD1VQQ_trksidZp1638.m118.l1247QQcmdZViewItem

I'd be careful of that one, looks like the metal tabs on the top are missing. They get broken off by people who don't know how to remove the visor ( see Tommy's post)
Jimi

I have one that has been removed by force, they do go back on but they are not as rigid

[eRATic]

i would be more than happy to swap my upper spoiler for your plain one. it'll save me a job to remove the toyota on mine.

[Tony jinxy froude]

£30 for a spolier thats shocking !! £15 for a good one £20 max for a mint one, postage is OTT as well although they are a pain in the ar$e to package . Jinxy