[Mk2] [Turbo] How do you change the side window.

Discussion and technical advice the SW20 MR2. 3S-GTE, 3S-GE, 3S-FE etc
Anything and everything to do with maintenance, modifications and electrical is in here for the Mk2.

Moderators: IMOC Moderators, IMOC Committee Members

Post Reply
copie
Posts: 124
Joined: Tue May 31, 2005 4:53 pm
Location: kent
Contact:

[Mk2] [Turbo] How do you change the side window.

Post by copie »

might be a stupid question to some people, i tryed doing search with out any luck. How do you change the small triangle side window on a mk2 MR2.

Any help ??
BLZ-8027
Posts: 5038
Joined: Fri Aug 11, 2006 6:46 pm
Location: leicester

Re: [Mk2] [Turbo] How do you change the side window.

Post by BLZ-8027 »

Carefully i broke one dead easy
The plastic rear vent needs to come off, and then you will see a couple of screws,The interior trim needs to come off then you will see some more screws, then you will need a sharp blade to cut all round the window to free the sticky stuff,This is the hard bit, you think you've done it all then push on the window and it breaks :oops: Just be carefull and patient don't put too much pressure on ,make sure you've cut all around ,and check for hidden bolts
bit basic but thats it really
Post Reply

Return to “MR2 MK2 1990 - 1999 NA & Turbo”