Well more bad news tonight!
![](./images/smilies/spacer.gif)
I am pretty sure that the wiring I have installed on the ecu and extra bits and bobs is not at fault, which is good.
![](./images/smilies/spacer.gif)
However even with the ecu loom totally removed I am gettin the ECU fuse pop!
![](./images/smilies/spacer.gif)
I have backtracked into the wiring under the ignition barrell and am finding that as soon as I turn the key the ECU fuse and turn signal fuse both blow! Well I think it is the turn signal fuse anyway.
![](./images/smilies/spacer.gif)
My alarm fuse also blows.
![](./images/smilies/spacer.gif)
so I don't think the problem is with the ECU side of things, I actually think it is with the under dash wiring as this headlight fault was there to start with but the ECU fuse was ok, now the ECU fuse keeps popping even though I haven't touched anything at that end.
![](./images/smilies/spacer.gif)
The fuse on the alarm is 15A.
![](./images/smilies/spacer.gif)
It seems suspicious that the Turn, and Alarnm fuses are blowing and the alarm is linked to the hazards when it arms.
![](./images/smilies/spacer.gif)
So myabe getting closer? Its very anoyying as the car is ready to start!
![](./images/smilies/spacer.gif)
Any help greatly recieved!
![](./images/smilies/spacer.gif)
Syptoms
![](./images/smilies/spacer.gif)
1.
![](./images/smilies/spacer.gif)
left turn signal on but does not flash
2.
![](./images/smilies/spacer.gif)
Soon as key is turned ECU IG, Alarm fuse and Turn fuse pop
3.
![](./images/smilies/spacer.gif)
Turn light stays on
4.
![](./images/smilies/spacer.gif)
Full beam lights work
5.
![](./images/smilies/spacer.gif)
Retracting light relay box thingy humms a little?
6.
![](./images/smilies/spacer.gif)
EFI fuse has blown once only when fiddling
7.
![](./images/smilies/spacer.gif)
Tried a larger fuse in ECU IG as a trial and it blew straight away
8.
![](./images/smilies/spacer.gif)
Cup of tea cake and a few tears
![](./images/smilies/spacer.gif)
James