Rev 5 Spoiler Bolts

[l1ca]

I've recently sent a Rev 5 spoiler away for repainting, now its back I cant seem to find all the bolts I need to put it back together

Anyone know what size bolts are needed to fit the spoiler blade

These bolts:

(I know about the strange pivot bolt, thats been removed prior and replaced, but I cant remember the size)

Also the end cap allen key bolts


Thanks guys. Derp.

[wilkie senior]

Hey my pic there of the spolier caps ha ha (well Wilki the younger when it was his)

Give me a moment I will check what the allen bolts are

[wilkie senior]

bolts for spoiler caps


M6

Only short, 5mm to 10mm

[l1ca]

Thanks!

Appreciate that

Right, that's them ordered, what about the inners / blade? I think I remember the head being 8 or 10mm? Not sure about the thread or length though....

[thomp1983]

The gold coloured ones are 10mm heads m8 thread there probably 15-20mm long, jobs like this are why it's worth owning a Vernier but as I'm guessing you don't get something small like a cocktail or lollipop stick put it in the hole till it bottoms out, mark it and then measure with a ruler or tape then round down to the nearest 5mm for example a 22mm deep hole would want a 20mm long bolt.

[shinny]

Hey my pic there of the spolier caps ha ha

And mine for the other photo... even hotlinked from my website

Not that any of that is a problem