my stock cables were seized, so ive removed them from the rear calipers. looked at toyota new and thought im far too much of a cheap skate to buy them. found some pagid on ebay.
Anyone had an experience with the Pagid cables?
http://www.ebay.co.uk/itm/Pagid-Left-Re ... 1438.l2649
[Mk2] [Turbo] pagid handbrake cables
Moderators: IMOC Moderators, IMOC Committee Members
Re: [Mk2] [Turbo] pagid handbrake cables
Pretty sure I had these on my na mk2 a few years ago.
Didn't have any issue with them and did the job!
Didn't have any issue with them and did the job!
-
- Posts: 282
- Joined: Wed Oct 15, 2014 3:02 pm
Re: [Mk2] [Turbo] pagid handbrake cables
I've fitted Pagid a few times. They are ok but never fit as well as Toyota ones however they aren't £80 odd quid a side from Pagid.
Usual problem is you have to file down the ends of the strands of cable where they protrude too far where it connects to the front cable section.
No big deal I know but have a file handy when you do them.
Usual problem is you have to file down the ends of the strands of cable where they protrude too far where it connects to the front cable section.
No big deal I know but have a file handy when you do them.
Re: [Mk2] [Turbo] pagid handbrake cables
http://www.ebay.co.uk/itm/TO-CLEAR-NEW- ... 488e121afe
i used these, seem to work ok, have them on 2 cars now. out of stock atm though.
i used these, seem to work ok, have them on 2 cars now. out of stock atm though.
Re: [Mk2] [Turbo] pagid handbrake cables
Pagid are alright, worked well on my car. Better than some cheaper ones that were the same partnumber both sides, there is a slight difference side to side and Pagid ones are sided so do work.
Re: [Mk2] [Turbo] pagid handbrake cables
thanks guys, i'll give them a go, better than my current rusted ones