Looking for some info, has anybody used this bolt and washer set from mr2ben? Having my cover resprayed so looking to replace them.
https://mr2-ben.co.uk/products/660
Also on the subject, would people advise me to change the seals/ gaskets for the cam cover even if they were only replaced about 2000-3000 miles ago when the engine was rebuilt?
Cheers
Matt
[Mk2] [Turbo] Cam cover washers/ bolts
Moderators: IMOC Moderators, IMOC Committee Members
-
- Posts: 594
- Joined: Wed Feb 16, 2011 8:49 pm
- Location: Leicester
-
- Posts: 2025
- Joined: Mon Aug 05, 2013 8:18 pm
- Location: Swindon, Wilts
Re: [Mk2] [Turbo] Cam cover washers/ bolts
I used them and they were fine.
Re: [Mk2] [Turbo] Cam cover washers/ bolts
Thanks for the replies. I'll order that set then, clean up the mating face of existing sealant and install as per the maintenance manual.
Cheers
Cheers
Re: [Mk2] [Turbo] Cam cover washers/ bolts
You can buy bolts and rubber backed washers on ebay for less than half that price you realise? Just saying...
Re: [Mk2] [Turbo] Cam cover washers/ bolts
Got a link Ashley?
I can't see anything other than just rubber washers.
I can't see anything other than just rubber washers.
Re: [Mk2] [Turbo] Cam cover washers/ bolts
For example:
http://www.ebay.co.uk/itm/M6-x-19-Stain ... 0828739751
Sure with a bit of hunting you can find smaller pack sizes, and correct washer sizes....or even just buy rubber washers and use them under steel washers...
http://www.ebay.co.uk/itm/M6-x-19-Stain ... 0828739751
Sure with a bit of hunting you can find smaller pack sizes, and correct washer sizes....or even just buy rubber washers and use them under steel washers...
Re: [Mk2] [Turbo] Cam cover washers/ bolts
Thanks for that ashley, I'd already bought them though. Will look on ebay next time. Cheers