Can anyone provide step by step.. pictures preferably.
Of the location and how to get to the micro switch in a import drivers door.
Import Drivers door Micro-Switch
Moderators: IMOC Moderators, IMOC Committee Members
-
- Posts: 594
- Joined: Wed Feb 16, 2011 8:49 pm
- Location: Leicester
Re: Import Drivers door Micro-Switch
From memory once the door card is off you can get to the 2 little screws that attach it to the mechanism. Bear in mind this was a while ago son I can't be certain
Re: Import Drivers door Micro-Switch
Is that for imports as the switch is in the actual catch mechanism isn't it?
-
- Posts: 282
- Joined: Wed Oct 15, 2014 3:02 pm
Re: Import Drivers door Micro-Switch
Not the 2 door switches on the B pillar then?
-
- Posts: 594
- Joined: Wed Feb 16, 2011 8:49 pm
- Location: Leicester
Re: Import Drivers door Micro-Switch
As far as i can remember i just reached in with a little posi screwdriver as the 2 screws were visible..... but I may have had to;
detach actuator rod
undo 3 screws on the outside end of door
slide lock mech out
undo 2 little screws
unclip the wiring connector
mr2garages... No the 2 switches on the b pillar are the push button for interior lights and the lever for the seatbelt tensioner. Neither are associated with the central locking
detach actuator rod
undo 3 screws on the outside end of door
slide lock mech out
undo 2 little screws
unclip the wiring connector
mr2garages... No the 2 switches on the b pillar are the push button for interior lights and the lever for the seatbelt tensioner. Neither are associated with the central locking