Hi folks got car back. It's overboosting. On inspection, it's got a hose missing on one side of the actuator.
1 side goes to boost solenoid then onto turbo housing. Other side of actuator has no hose so I presume this is why it will overboost.
Can anyone pop me up a diagram of what the setup should look like. Am I correct in thinking the side that's missing a hose should have a blocked hose on it?
Diagram for boost solenoid setup
Moderators: IMOC Moderators, IMOC Committee Members
Re: Diagram for boost solenoid setup
As you said, one to the housing and one on the actuator. Then on the other side of the actuator I just have a bit of hose a couple of inches long with a bolt shoved in the end of it and cable tied on.