Wheel bolts

Discussion and technical advice the SW20 MR2. 3S-GTE, 3S-GE, 3S-FE etc
Anything and everything to do with maintenance, modifications and electrical is in here for the Mk2.

Moderators: IMOC Moderators, IMOC Committee Members

Post Reply
Mr Bognor
Posts: 252
Joined: Tue Oct 08, 2013 3:19 pm
Location: West Sussex

Wheel bolts

Post by Mr Bognor »

I need to get some new wheel bolts as my ones are a bit worn and have rust .

What is the correct size i need and does anyone know where you could get some light weight ones .

Wheel is the std 15 inch .

Thanks

Alan
Donato
Posts: 1262
Joined: Tue Oct 02, 2012 10:58 am
Location: Bolton

Re: Wheel bolts

Post by Donato »

If your on standard 15" wheels, you'll need the flat headed nuts. 99% of all aftermarket wheel nuts are tapered, so won't be the correct fitment. If you have the standard wheels nuts, they wont have rusted. Just give them a good scrub!
fingers99
Posts: 204
Joined: Tue May 13, 2014 11:31 pm
Location: Liverpool

Re: Wheel bolts

Post by fingers99 »

As he says.

I did look for lightweight ones pretty hard, but the lightest ones I could find were Mk1 MR2 ones. They work fine, but are a little trickier to fit.
Post Reply

Return to “MR2 MK2 1990 - 1999 NA & Turbo”