Koni adjustable dampers

[alex_evo]

Hey all

I got some 2nd hand koni adj dampers on my aw11. I want to ask about the damping adjustment.

Is there a stopper on the adjustment as in if i spin the knob say left (to soften) will it stop when it hit max softness or will it keep spinning ? as i have no idea what setting im on atm

Thanks

[aw11rally]

There are something like 24 clicks of adjustment. I presume you have the original adjustment knob, I think it has an arrow on it saying clockwise is harder.

I set mine at fully soft then gradually harden until the desired result is achieved.

I seem to remember that going softer at the front helps reduce understeer. A bit of trial end error is always fun, as long as the errors arn't too serious.

[un1eash]

Mine didn't click, they just turned 2.5 times, rears slightly less. I use to run about 1 whole turn from full soft. To hard and the rear would life on our lovely British roads and to soft the front would dip to much under hard braking.

[Lauren]

It should be reasonably obvious when you turn the knob. Anticlockwise to full soft, clockwise to full hard. Think like a tap.

I'd go for a mid way setting to start with.

[alex_evo]

Thanks for the replies.

But im asking if the adjustment has a stopper as in if i turn (say anti-clockwise to soften it) will it stop clicking when i hit max softness and vice versa for hardness

As in my previous car (ae86) i had TRD's at the rears where if its on 0 you can turn clockwise to 1 or anticlockwise to 8 from 0. (which is max soft to max hard in one click !)

Since the koni's dont have numbers on them and left/right is pointing in different directions im not sure if both sides are equal

I haven't adjusted them yet as i want to make sure or i will ruin them lol

[Lee H]

They have a stop when they get to full adjustment either way. They don't click.

[alex_evo]

Thanks buddy, I managed to get them on just yesterday even tho i got them ages ago lolol

[aw11rally]

Sorry I thought my Koni adjusters were indexed, maybe I was getting them confused with the Leda coilovers. Anyway there is definitely a stop at max and min.