Its three years since I took FoXI apart and now I am trying to put it all back together again I am having a few problems.
Does anyone have a diagram or picture of the routing for the headlamp/sidelamp/indicator wiring loom after it exits the frunk. I have tried to match up the plastic locating bits with various holes but it doesnt seem to want to fit.
Any help would be appreciated.
Many Thanks
Douglas
Help! Routing for Lighting wiring loom
Moderators: IMOC Moderators, IMOC Committee Members
-
- Posts: 63
- Joined: Tue Oct 23, 2007 10:28 pm
- Location: Tadcaster
Re: Help! Routing for Lighting wiring loom
This any help ?
-
- Posts: 63
- Joined: Tue Oct 23, 2007 10:28 pm
- Location: Tadcaster
Re: Help! Routing for Lighting wiring loom
Didnt really help Jimi, but I think I have got it sorted.
I fitted the headlamp unit and when I connected the plugs I saw that the loom lay on the outside of the unit. I then went and looked at the wing and realised that the loom actually clamps to the wing.
Douglas
I fitted the headlamp unit and when I connected the plugs I saw that the loom lay on the outside of the unit. I then went and looked at the wing and realised that the loom actually clamps to the wing.
Douglas