[Mk2] [Generic] Howto: Polybush your MK2
Moderators: IMOC Moderators, IMOC Committee Members
Re: [Mk2] [Generic] Howto: Polybush your MK2
Is this the wrong one for the front on a rev 3+ car does anyone know?
96 Rev 3 Turbo, Done!
Re: [Mk2] [Generic] Howto: Polybush your MK2
Looks like the rev1 one mate 
Re: [Mk2] [Generic] Howto: Polybush your MK2
yep that's rev1 - rev2+ is the cone shaped big one...
the ones on the far right, row in the middle(you can see the rev1 ones above them)
- rev2+ is the cone shaped big one...the ones on the far right, row in the middle
(you can see the rev1 ones above them)Current: 2007 Porsche Cayman S
Gone:'94 rev3 NA, '92 rev2 Turbo forged, '07 Civic Type-R
Gone:
'94 rev3 NA, '92 rev2 Turbo forged, '07 Civic Type-RRe: [Mk2] [Generic] Howto: Polybush your MK2
I had those Rev1 front bushes bundled in with mine too and i was worried i had been sent the wrong ones, but turns out they was in there extra. If you have purchased the complete kit then i suggest you lay all the pieces out like toxo did in the first page and compare them.
If you have purchased the complete kit then i suggest you lay all the pieces out like toxo did in the first page and compare them.Re: [Mk2] [Generic] Howto: Polybush your MK2
I bought mine from a guy on here new in the box. Sure he said rev 2+ cars but never mind. I'll buy them on there own if possible.
Also is there any bushes available for these bits circled in red.
Sure he said rev 2+ cars but never mind. I'll buy them on there own if possible.Also is there any bushes available for these bits circled in red.
96 Rev 3 Turbo, Done!
-
toxo
- IMOC Committee
- Posts: 11345
- Joined: Tue May 30, 2006 5:41 pm
- Location: The Toast Aisle
- Contact:
Re: [Mk2] [Generic] Howto: Polybush your MK2
bri0905 wrote:I bought mine from a guy on here new in the box.
I've got the front ones spare for the rev2+ tension arms because I upgraded to adjustable tension rods shortly after polybushing.
So used but in great nick.http://www.imoc.co.uk/forums/viewtopic.php?t=149111
bri0905 wrote:Also is there any bushes available for these bits circled in red.
Not as far as I'm aware!
IMOC-UK - the only club to win 'Best Club Stand' at JAE more than once, and twice in a row!
- the only club to win 'Best Club Stand' at JAE more than once, and twice in a row!Re: [Mk2] [Generic] Howto: Polybush your MK2
Nice one toxo, i'll have them off you. Let me know how much and where to send it.
Bri
Let me know how much and where to send it.Bri
96 Rev 3 Turbo, Done!
Re: [Mk2] [Generic] Howto: Polybush your MK2
bri0905 wrote:
Also is there any bushes available for these bits circled in red.
Twos R Us in the US sell a replacement part.
http://www.twosrus.com/catalog/product_ ... cts_id=547Re: [Mk2] [Generic] Howto: Polybush your MK2
Ok for anyone using Super Pro Urethane bushes here is the reply I got from their suport team regarding the washer on the forward side of the inner rear bush.
"We believe the washer is not required with our kit. However to confirm I would measure the length of the OE crush tube and compare it to our crush tube they should be the same.
The washer was probably put there to take up the thrust of the rubber bush not required with urethane."
Take from that what you will, I have not fitted a washer.
"We believe the washer is not required with our kit. However to confirm I would measure the length of the OE crush tube and compare it to our crush tube they should be the same.The washer was probably put there to take up the thrust of the rubber bush
not required with urethane."Take from that what you will, I have not fitted a washer.
Re: [Mk2] [Generic] Howto: Polybush your MK2
jon wrote:bri0905 wrote:
Also is there any bushes available for these bits circled in red.
Twos R Us in the US sell a replacement part.
Someone should organise a group buy for those
