[Mk2] [Turbo] Mapping
Moderators: IMOC Moderators, IMOC Committee Members
[Mk2] [Turbo] Mapping
Hello im after someone to map my mr2,im from York So idaely after someone in the north east,the car is on apexi power fc,just run in on a base map,standard cams, gt35, 1000cc injectors boot mount intercooler any info would be great thanks Will
-
- IMOC Affiliated Company
- Posts: 4928
- Joined: Tue Dec 14, 2004 9:33 am
- Location: 01442 601301
- Contact:
Re: [Mk2] [Turbo] Mapping
RyanG @ 2BarTuning go nowhere else.
Re: [Mk2] [Turbo] Mapping
Thanks for the reply im trying to go to Ryan via Peter Giddon @ SBITS but struggling to sort a date so was seeing if anyone esle avaible closer cos Ryan is miles away and im getting desperate to have a go with the car as drag strips events are coming up very soon
Thanks Will
Thanks Will
Re: [Mk2] [Turbo] Mapping
Give Ryan a call direct mate, and he's usual willing to travel
-
- IMOC Affiliated Company
- Posts: 4928
- Joined: Tue Dec 14, 2004 9:33 am
- Location: 01442 601301
- Contact:
Re: [Mk2] [Turbo] Mapping
if you want ryan to map it don't compromise. After all the work you don't want someone you're not sure about doing the mapping.
Re: [Mk2] [Turbo] Mapping
RS tuning in Leeds
-
- Posts: 7172
- Joined: Thu Dec 16, 2004 6:39 pm
- Location: Oldham
Re: [Mk2] [Turbo] Mapping
Ryan every day. He travels oop north & uses RS Tuning for their dyno. I had mine done there by him. It work out better to get a few guys getting mapped as you can share costs. Dyno cell for day, ryan's travel etc.
476bhp & 415ft lb @ 1.9bar Magic by Ryan!
Gone, but never forgotten
Now with a mk1.5 & a NHB EP3
Gone, but never forgotten
Now with a mk1.5 & a NHB EP3
Re: [Mk2] [Turbo] Mapping
Well that was the plan to try get say 3 people in one day to go to RS tunning and get Ryan to do them, i was going thru Peter as he done alot of work on the car,put a base map on it and he also might of known some other lads wanting mapping,i have heard Ryan is the best soo idealy wanted him to do,but im running out of time the car is just sat there ready run in on a fresh engine to be mapped,thanks for the replys
-
- Posts: 7172
- Joined: Thu Dec 16, 2004 6:39 pm
- Location: Oldham
Re: [Mk2] [Turbo] Mapping
Have you actually spoken to Ryan? There's every change he's got a couple of lads in the same boat as you bit with different cars. Eg, mr2 (you), Scooby (mr x), and a supra (mr y) if you get me?
476bhp & 415ft lb @ 1.9bar Magic by Ryan!
Gone, but never forgotten
Now with a mk1.5 & a NHB EP3
Gone, but never forgotten
Now with a mk1.5 & a NHB EP3
-
- Posts: 464
- Joined: Thu Dec 08, 2005 8:41 pm
- Location: kidderminster
- Contact:
Re: [Mk2] [Turbo] Mapping
I used Ryan a few weeks ago and cannot recommend the guy enough. IMO opinion it is very important you use a mapper who has massive knowledge on the engine being mapped as Ryan does.
Re: [Mk2] [Turbo] Mapping
MB Automotive, very impressed with his mapping skills
Re: [Mk2] [Turbo] Mapping
Jason @ Area 52
Dave Rowe - If you are going for a Motec
Dave Rowe - If you are going for a Motec
Re: [Mk2] [Turbo] Mapping
im up north and need mappin but it wont be til the start of june im afraid.
Ive used ryan in the past and wil use him again.
Ive used ryan in the past and wil use him again.
Re: [Mk2] [Turbo] Mapping
Speak to Peter gibbons guys as we have booked a date for up north mapping in may
Re: [Mk2] [Turbo] Mapping
Were would the mapping take place out of intrest might have to get organised ?
Re: [Mk2] [Turbo] Mapping
Cheers rob not to far from me
Re: [Mk2] [Turbo] Mapping
i may need mapping in may fingers crossed, u set an exact date yet?
assuming ur gunna be using rs tuning again?
assuming ur gunna be using rs tuning again?
Re: [Mk2] [Turbo] Mapping
1up for Ryan. He mapped my car so well. Im running a Rev2 Turbo engine with CT20 and boltons. Im running shy of 300bhp on the dyno and im pulling 0-60 times of 3.75secs proven.