[FINALIZED] 1994 SMG Rev 3 GTS - Modified 360bhp

MR2s for sale - all versions & variants

Moderators: IMOC Moderators, IMOC Committee Members

Locked
RobMason
Posts: 65
Joined: Thu Jan 08, 2009 9:05 am
Location: Silsden, West Yorkshire

1994 SMG Rev 3 GTS - Modified 360bhp

Post by RobMason »

As I write this part of me feels like I should scrap the whole selling idea but to be honest I think I am ready for a change. Decided to get back into motorbikes and this is a very expensive car to let sit on the drive.

Ok so..........

1994 Rev 3 GTS in what a think is the best colour, Steel Mist Gray (SMG.)
87260 KM on the clock
MOT till 5th Nov 2011 (sailed through)
Tax till 30th April 2011
Toad Ai606 Alarm with 2 fobs

Exterior:

FE front bumper with colour coded Rev3 splitter (i love the fogless look)
Genuine Pheonix Power Engine Lid
Rev5 spoiler with black blade
Ganador Mirrors
Lenso D1-R alloy wheels in black with red lip (staggered 8" & 9")
Tein Super Street Coilovers
TRD Anti Roll Bars
TRD Strut Braces
CRN grooved brakes
Yellowstuff pads (excellent stopping power when warm)

Engine:

Forged engine with Wossner Pistons built by PR Autos Toyota Specialist
Rogue Rev6 Charge Cooler
Rogue Rev6 Fans
Sard 800cc Injectors
HKS Dump Valve
Turbo Technics S175 Hybrid turbo
Apex'i Power FC with Hand Commander
Mapped @ 360bhp by RSTuning in Leeds @ 1.3ish bar
Berk Exhaust & Downpipe (now getting rare I believe)

Interior:

Leather seats
Defi Electronic Gauges (Boost, Oil and Water Temp)
3 gauge centre pod (above clock)
Defi gauge controller mounted in cubby box
HKS EVC 6 mounted in right centre air vent
Momo Quark Steering Wheel

I am sure I have left many things out of the spec list but I have a folder full of receipts for most of the above. Feel free to count up how much I have spent on this car if you buy it (you will be shocked, I know I was)

Some Pics (i have taken a selection of the best pics I have of the car so dont be shocked if you see a VS spoiler)

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

I will also include (if the buyer wants) a full GENUINE Veilside kit with the car, this includes front and rear bumpers, skirts, and spoiler.

Price - £5000 ONO I am not too bothered if this doesn't sell but I still think this is a cracking price for what you are getting. This car will easily make big power if someone sticks a large turbo on it. At the moment I think it is suited to fast road driving (if thats what you like doing.)

Any questions feel free to ask, any more pics also feel free to ask.

Thanks for looking

Rob

PS

This is what the car looked like with the VS kit which will be included
Image
Image
2004 Silver MK3, standard-ish for now ;)
User avatar
Scott Barton
IMOC Committee
Posts: 11170
Joined: Sun Mar 13, 2005 10:14 pm
Location: Wateringbury, Kent

Re: [FINALIZED] 1994 SMG Rev 3 GTS - Modified 360bhp

Post by Scott Barton »

One of my favourite kits on a car! And genuine as well....good luck with the sale.

:thumleft:
IMOC - winners of JAE best overall club stand 2010, 2013, 2014 & 2017!
1994 GT-S T-Bar 397bhp with NOS *sold*
2016 Porsche Cayman 981GTS 347bhp Flat Six
bluesmoke
Posts: 1300
Joined: Fri Oct 23, 2009 11:03 am
Location: West Yorkshire

Re: [FINALIZED] 1994 SMG Rev 3 GTS - Modified 360bhp

Post by bluesmoke »

Noooooooo Rob!! :shock:

This is such an awesome car, don't do it!
RobMason
Posts: 65
Joined: Thu Jan 08, 2009 9:05 am
Location: Silsden, West Yorkshire

Re: [FINALIZED] 1994 SMG Rev 3 GTS - Modified 360bhp

Post by RobMason »

Thanks Scott, I loved the kit was just too low for the roads where I live.

Jay, I think I'm ready for a change, as I said in the ad its too nicer car not to be used.

Rob
2004 Silver MK3, standard-ish for now ;)
Steve-m-uk
Posts: 174
Joined: Tue Dec 28, 2004 12:59 pm
Location: Leeds,West Yorkshire

Re: [FINALIZED] 1994 SMG Rev 3 GTS - Modified 360bhp

Post by Steve-m-uk »

Cracking car Rob, a bargain at that price considering all the top notch parts that have gone into the build, the next owner will not be disappointed :thumleft:
Best of luck with the sale bud :)
RobMason
Posts: 65
Joined: Thu Jan 08, 2009 9:05 am
Location: Silsden, West Yorkshire

Re: [FINALIZED] 1994 SMG Rev 3 GTS - Modified 360bhp

Post by RobMason »

Thanks Steve. I hope buyers are aware just how much money, time and effort has been put into the car.

Rob
2004 Silver MK3, standard-ish for now ;)
Rob B
Posts: 285
Joined: Tue Oct 20, 2009 8:50 am

Re: [FINALIZED] 1994 SMG Rev 3 GTS - Modified 360bhp

Post by Rob B »

Lovely car at a very good price

Doubt it will hang around
StevenstonWullie
Posts: 141
Joined: Tue May 27, 2008 5:43 pm
Location: NORTHAYRSHIRE, SCOTLAND

Re: [FINALIZED] 1994 SMG Rev 3 GTS - Modified 360bhp

Post by StevenstonWullie »

cracking looking tubby but im not keen on the engine lid :?
RobMason
Posts: 65
Joined: Thu Jan 08, 2009 9:05 am
Location: Silsden, West Yorkshire

Re: [FINALIZED] 1994 SMG Rev 3 GTS - Modified 360bhp

Post by RobMason »

Thanks guys for the comments :thumleft:

If whoever buys the car wants to sell the engine lid, trust me they will have no problem doing so. Quite a few people have asked me to sell it to them. No everyones taste but its a super rare Jap goody :)

Rob
2004 Silver MK3, standard-ish for now ;)
Ren0W
Posts: 1829
Joined: Sun Oct 05, 2008 11:38 pm
Location: Netherlands

Re: [FINALIZED] 1994 SMG Rev 3 GTS - Modified 360bhp

Post by Ren0W »

Cool picture :thumleft:

Image
Image
RobMason
Posts: 65
Joined: Thu Jan 08, 2009 9:05 am
Location: Silsden, West Yorkshire

Re: [FINALIZED] 1994 SMG Rev 3 GTS - Modified 360bhp

Post by RobMason »

Ren0W wrote:Cool picture :thumleft:

Image


Thanks, its one of my favourites :)

Can't wait for sun like that again

Rob
2004 Silver MK3, standard-ish for now ;)
RobMason
Posts: 65
Joined: Thu Jan 08, 2009 9:05 am
Location: Silsden, West Yorkshire

Re: [FINALIZED] 1994 SMG Rev 3 GTS - Modified 360bhp

Post by RobMason »

Bump :)

Also, the car has Jap fitted HID headlights and sidelights.

Going to stick some new pics of the interior, boot and frunk tonight.

Rob
2004 Silver MK3, standard-ish for now ;)
welshboyo
Posts: 204
Joined: Tue May 24, 2005 8:21 pm
Location: wales

Re: [FINALIZED] 1994 SMG Rev 3 GTS - Modified 360bhp

Post by welshboyo »

StevenstonWullie wrote:cracking looking tubby but im not keen on the engine lid :?


not to keen on the engine lid lol :-s he is not asking you to buy the car for the engine lid, its a cracking tubby very well set up i think some people should look past parts of the body kit they dont like its easy to change. good luck with the sale mate someone will have a cracking tubby :thumleft:
StevenstonWullie
Posts: 141
Joined: Tue May 27, 2008 5:43 pm
Location: NORTHAYRSHIRE, SCOTLAND

Re: [FINALIZED] 1994 SMG Rev 3 GTS - Modified 360bhp

Post by StevenstonWullie »

Never said it wasnt a well set up car boyo! cant beat a nice condescending post , anyway still dont like the engine lid...

welshboyo wrote:
StevenstonWullie wrote:cracking looking tubby but im not keen on the engine lid :?


not to keen on the engine lid lol :-s he is not asking you to buy the car for the engine lid, its a cracking tubby very well set up i think some people should look past parts of the body kit they dont like its easy to change. good luck with the sale mate someone will have a cracking tubby :thumleft:
mr2magic
Posts: 643
Joined: Fri Apr 09, 2010 9:33 am
Location: Hannover, Germany

Re: [FINALIZED] 1994 SMG Rev 3 GTS - Modified 360bhp

Post by mr2magic »

If only I hadn't bought a crappy old Gen2 12 years ago ](*,) Anyhow.......if you ever decide to break it... I want those wheels!!!

Good luck with the sale.

M.
welshboyo
Posts: 204
Joined: Tue May 24, 2005 8:21 pm
Location: wales

Re: [FINALIZED] 1994 SMG Rev 3 GTS - Modified 360bhp

Post by welshboyo »

StevenstonWullie wrote:Never said it wasnt a well set up car boyo! cant beat a nice condescending post , anyway still dont like the engine lid...

welshboyo wrote:
StevenstonWullie wrote:cracking looking tubby but im not keen on the engine lid :?


not to keen on the engine lid lol :-s he is not asking you to buy the car for the engine lid, its a cracking tubby very well set up i think some people should look past parts of the body kit they dont like its easy to change. good luck with the sale mate someone will have a cracking tubby :thumleft:


your entitled to your opinion mate, but the guy is trying to sell his car he is not asking for people to come on here and say what parts of the car they hate.
Razor04
Posts: 2560
Joined: Mon Jun 09, 2008 4:25 pm

Re: [FINALIZED] 1994 SMG Rev 3 GTS - Modified 360bhp

Post by Razor04 »

veilside nose cone is so loooong it discust's me
Feedback Bot

Re: [FINALIZED] 1994 SMG Rev 3 GTS - Modified 360bhp

Post by Feedback Bot »

This Sale has been completed. The Buyer was Non-Member
Locked

Return to “MR2s for Sale”