[Mk2] [Turbo] Tubby exhaust mounts - help

[tubbyone]

Help
I am replacing a Blitz Nur Spec on my Rev 2 tubby with a Mongoose as the Blitz is too loud for track days and my ageing ears! The exhaust mount on the rear sub frame for the mid pipe on the Blitz has a slot in the middle but the Mongoose mid pipe hangar is round - can anybody tell me what is standard?
Thanks in advance.

[Driftlimits Performance]

standard they are oval, but get a bit of fairy liquid and she'll slide on in there

[dervbas]

I had to do this to pass the MOT the other day!

£5 from a scrap yard it cost as my mounting that is supposed to be bolted to the subframe was missing! I have a turbo Mongoose too!

Looks something like this:



Quick google search found it at this shop on this webpage:

http://www.jdmperformance.co.uk/last_30 ... arName=MR2

...but remember scrap yard is definitely worth while considering!

And as Skywalker said, since it is a very tight fit (sliding the shaft off the Mongoose through this rubber bush) it is best to lubricate the shaft; I coated it in copper grease and it slid in with very little effort.

Good luck!

[tubbyone]

Thanks guys - I will give it a go with some form of grease.