[Mk2] [Generic] Smooth Rev3 Centre Panels Ebay Jobbies

[mrRobbo2]

Anyone ordered one of these from ebay?

Just wondering how you have attached it to your car as there is no bolts or screw holes,

I currently have them fitted onto the lights

Im not convinced of the quality either.

http://cgi.ebay.co.uk/TOYOTA-MR2-REAR-C ... 27acc1da4f

[foxy-stoat]

Had one of them for the older style lights.

They are wedged in behind the lights, you have to undo the screws at the top, move the lights a bit and fit the panel, refit the lights.

Simples

[jimjams]

Fitted mine and its fine, Drilled 2 holes in the top for the original screw holes into the light brackets and found a couple of clips that pushed into the bottom clips of the light bracket and smothered them in windscreen bond, fitted the panel and pushed it onto the clips with the bond, left too set and everythings mint.

[mrRobbo2]

its the bottom part im struggling to fasten down.

i drilled 2 small holes and fitted a bracket on that fastens to the top of the lights

the bottom however aint working.

the guy who sells them said silicone it on, which doesnt hold

[jimjams]

2 of these.....



Pushed into the bottom clips of the rev3 light brackets and smothered in windscreen bond, then push the panel on and leave it for a day or 2, sets rock and you have a fixed panel!