MR2 MK2 SILLS

Discussion and technical advice the SW20 MR2. 3S-GTE, 3S-GE, 3S-FE etc
Anything and everything to do with maintenance, modifications and electrical is in here for the Mk2.

Moderators: IMOC Moderators, IMOC Committee Members

Post Reply
stephen brooks
Posts: 14
Joined: Sun Nov 25, 2007 10:21 am
Location: scarborough

MR2 MK2 SILLS

Post by stephen brooks »

hi,i'm the guy on ebay who does the wheel arch repairs for the MK1 and i get one or two emails every week asking if i do sills for the MK2.
my question to you guys and girls is what is the availability if any and would it be worth me tooling up to make them?
also would you want a skin sill or the full sill?
all the best,Steve
punkrockscreech
Posts: 84
Joined: Sun Apr 12, 2009 4:16 pm
Location: Worcester.

Re: MR2 MK2 SILLS

Post by punkrockscreech »

I'd be interested in the full sill as both of mine are looking pretty rotten.
cheers.
DNOS808
Posts: 131
Joined: Wed Nov 14, 2007 12:29 pm
Location: Gloucester

Mk2 sills

Post by DNOS808 »

Hi
If you tool up and make the parts I will have a set. I have a Mk2 that is off the road due to a rot problem. It is impossible to cut out a repair section since they all rot in the same place.
Cheers
stephen brooks
Posts: 14
Joined: Sun Nov 25, 2007 10:21 am
Location: scarborough

mr2 sills

Post by stephen brooks »

thanks for that but can you buy them from toyota still :?:
mrpsychopath
Posts: 7
Joined: Mon May 25, 2009 8:29 pm

Re: MR2 MK2 SILLS

Post by mrpsychopath »

you can buy the mid sill section, but the front of the full sill comes on the piller section and the rear of the full sill comes with the rear quarter, been there and done this, fortune me lad a fortune.
gtech
Posts: 1456
Joined: Tue Dec 14, 2004 7:53 am
Location: Darlington. Co Durham
Contact:

Re: MR2 MK2 SILLS

Post by gtech »

The wife just had a full pro respray on her NA, part of that was replacing the sills prior to spraying, they went to Toyota who wanted really silly money, through trial and error they found out that For KA sills were near enough the perfect fit, minor bit of modding and sills fitted and look spot on, cost was minimal.
Berk Tech IC, Berk Tech Downpipe, Berk Tech Exhaust, ARC Induction System, DevilsOwn Water/Meth Injection (Pre & Post turbo). TRD Cold Pipe, EMS Powered Digital Boost Gauge, TRD Strut Braces, Innovate O2, Blitz SBC i-color EBC - "ARCH ROLLER FOR HIRE"
darlofil
Posts: 33
Joined: Thu May 19, 2005 8:24 pm
Location: darlington

Re: MR2 MK2 SILLS

Post by darlofil »

hi know this is an old post ....what year ka sills did you use??? cheers phil
dude**sweet**dude
ToyotaTosh
Posts: 459
Joined: Sat Aug 09, 2008 4:01 pm
Location: Liverpool, UK

Re: MR2 MK2 SILLS

Post by ToyotaTosh »

worth finding out about if they do the job
Post Reply

Return to “MR2 MK2 1990 - 1999 NA & Turbo”