[Mk2] [Generic] removing side intake vents

[glimited2000]

Does anyone have a guide on removing the side intake vents? I went to replace mine but didnt know how. Any help would be great thanks.
Rob

[Chris]

You need to remove the inside panels from behind the seats. Undo the securing bolts for the seatbelt reels. There are 2x 10mm nuts holding on the strip from the inside. Remove these nuts, them remove the screw from the underside of the wheelarch's. Give the strips a good pull to remove them. The panels are then clipped at the bottom. A good pull should get them off.

[glimited2000]

great thanks alot chris I'll give that a go tomorrow then.

[JohnnyC]

Pics here:
http://www.imoc.co.uk/forums/kb.php?mode=article&k=112

[glimited2000]

thanks for the help guys, job done and looking good!
cheers