www.imoc.co.uk

So draven,

in your honest opinion you think its HG failure

Definitely said in the manual to do 90 degrees extra turn.
I was supplied the gasket and stretch bolts by tcb parts.
A friend has looked at it and he has a garage and thinks it's the piston rings. But I still am skeptical as all four??

Spot on guys! Thanks. I'll call him tomorrow

I want certain modification upgrades the boost control and gauges also would like a rev limiter and really want someone who has experience on mr2.
Someone with the knowledge of remaps or anything like my knowledge is not so good so would like an expert.[/list]

https://youtu.be/HGgF97mxbWc

This is when I put the head on...

Did I fit the so gasket incorrect. Starts at 8 secs

Yeah. I suppose it's possible that because it was sat for a while in the garage not moving or doing anything the oil rings got stuck. But all 4? That's some bad luck right there In regards to the head gasket being fitted incorrect. Nah I don't believe so all holes lined up. And wouldn't it be p1$$in...

I had a 3s-ge in which all oil control rings had seized into the pistons. Consequently burned as much oil as it did petrol. I don't remember compression test results but it burned oil like crazy. so all 4 went at the same time... okay so i think thats what has happened here. I dont think my work ha...

http://imgur.com/8RWxWup Theres a pic of cylinder 3... pretty much the same story on every cylinder. the walls look okay. little pool of oil on the angle of the piston. could the cylinder drain holes be blocked? for it to be all 4 cylinders... every valve seal would have to be dodgy. for it to be al...

3sge engine no turbo. G limited All the valve stem seals have been done. New head gasket. Started it up seemed fine. Now a week later and oil on all four cylinders. Is it possible that all the piston rings can go? On all four pistons?? At the same time... Is it possible that a hose has been connecte...

How does anyone do this? I bought an MOT failure... I have the car insured to drive to a fro for an MOT test. But my MR2 had a major oil leak and unburnt oil in the exhaust needs a good blow through. I want to drive it for 200 miles. But if I got pulled over what is my excuse? They will hardly buy ...

How does anyone do this? I bought an MOT failure... I have the car insured to drive to a fro for an MOT test. But my MR2 had a major oil leak and unburnt oil in the exhaust needs a good blow through. I want to drive it for 200 miles. But if I got pulled over what is my excuse? They will hardly buy t...

good news we fixed the sensor as I just put a new cat on yesterday!

Yes confirmed!!!!! you saved the day... I have no error code anymore!!!
I reset the ecu and its a healthy engine...

having an oxygen sensor that was wired up wrong would have what effect? possible bad emissions?

Sir you are a legend!

This was a car I bought for cheap of a guy who had no idea. so it doesnt surprise me he wired it up wrong... looks like a brand new sensor aswell!

Apparently the wiring on the sensor by Denso Blue - sensor White - ground black - heater black - heater I have this image with Black, Red/white, Black/yellow, Brown 4 wires in total http://imgur.com/7oBbKBR and this is the actual picture inside my car of the existing denso sensor... http://imgur.com...

Thanks man. What I thought but just wanna double check

Hi guys

whats this seal packing exactly... is it just a gasket seal?

i cant exactly tell in the picture where they want it? the two sides at the edge???

picture attached

Finally got the head off!!!!

Can anyone with experience watch the end of my video to give me a verdict of what they think of the pistons.

https://youtu.be/qACVUdmXKuE

I now have 8 parts to my youtube channel. Finally have got to the cam belt. Taken the Alternator off completely. Now I just gott aget that air intake manifold off. Hey kantsas, cool videos! I have also recently started my own channel: https://www.youtube.com/channel/UCo_zmuyLXOvNAnwpeo0L0Dw I have t...

I have 7mm holes all the way through the stud, ive tried to extract but they will not budge. If you have managed to get that far then I'd try heating up the remains and then using an extractor like below on the remains. Image Replaced With URL For Quote http://cdn.toolstation.com/images/141020-UK/8...