www.imoc.co.uk

Hi do you still have this

Excellent thanks for the replys also what would you guys think there worth

Hi all I need help to identify these wheels

So any help will be appreciated thanks Martin[/b]

Did you ever find out what the problem was as I'm having the same problem with mine at the moment

ok in the last 3 months of running this car i have had some good fun with it and realy injoyed it but as winter is coming up and theres bin more rain i have found that my drivers side foot well keeps filling up with water so after a little looking around to find the leak i have found that a lot of t...

excellent thanks for the help guys

Can any one tell me what the outlet on the cylinder head is under the inlet manifold nut and what goes on it
[/quote]

I had the same problem with mine for me it was a case of a damaged wire
The wire was black with a yellow strip all I did was and a new wire in from the alternator plug to the fuse box and all worked fine after that

when i did mine i spent the best part of a day to release all the seized bolts off the cat supports and i managed to remove mine with out removing the oil cooler but it was a very tight fit

Just seen a black mk2 with white wheels in purton

so just to clarify any of the CP/JE/SRP/Ross/Arias Pistons with a Factory head gasket will give me a c/r of 8.5:1

and can any one tell me what my c/r would be if i used the wossner pistons
and what would be needed to hit 400/450 whp

i had no problems fitting mine at all it

his is the one i hand on my old na ebay Item number: 150772561664
i did have to buy a new lambda screw in type from http://www.tcbparts.co.uk/ and exstend the wires to fit it tho

It was piston 4 that failed on a standard head gasket and I don't know what boost it was run at as I bought the engine as a non runner


As for the pistons I have bin looking at non of the adds I look at state what thickness of head gasket to use with them

I'm not 100% sure on what my long term plans are for the engine so I was planing on making the block as strong as possible so I can increase bhp in the future My short term plans was to get about 350bhp out of the engine and the only reason I am looking to forge the block now is I found one of the p...

Can any one tell me I can get away with just a hone or will I need to rebore the cylinder as its a very light mark

Hi I am starting a new engine build and most of the forged pistons I look at have a cr of 9:0-1 where as far as I can see the standard cr is 8:5-1 so my question is can any one tell me if this will make a big difference in the way my enging will run or should I be looking at going lower with the cr ...

I was thinking about the ct20b but it is a rather old unit now so I would need to add the cost of a rebuild on top of the cost of the unit as well

Hi my ct26 is on its way out so I am looking for advice on upgrade options and whats worked for others

ok minor update well my car passed its mot on wednesday so on friday i went about fitting the quad headlights i got off ebay and what a bunch of cr**e thay are, they dont fit wright and are a shody job so i will redesign them to fitt better and work wright as at the moment only the diped beam works ...