www.imoc.co.uk

Cheers guys for all your help. I now have a better understanding of what is going on so will hopefully be able to diagnose the high co better. at least I know the 02 sensor is working OK! I have just found the intake air temp sensor was not installed in the air box and has been floating around in th...

cheers guys this is brilliant info. I have just read the autodata book again and it does say 8 times in 10 seconds :oops: I read it as 8 to 10 times a second! :neutral: thats very interesing understanding what the voltage on VF1 and E1 means. so my 3v (think it was 2.88 ) means it running slightly r...

Hi Jon, Thanks so much for taking the time to reply with such valable info. I was following the autodata book where it first says to bridge TE1 and E1 then measure the voltage between E1 and VF1. unfortunatly I only have a digital multimeter so was hard to see if it was fluctuating 8 to 10 times a s...

I'm trying to get to the bottom of the high co on my car and I'm using some old autodata books to help me check for things. One of which is testing the o2 sensor by bridging pins on the diagnostic port and measuring the voltage across other pins. If I do this and measure the voltage I'm getting arou...

Cheers Nic, very kind of you. I think mine is the first one as mine is a late rev2 registered in early 94

Does anyone know the correct part number of the o2 sensor for a rev 2 na? I think I need to order a new one but not convinced the old one is the right one so don't want to use that for the part no. that most places seem to want when ordering a new one.

fan now switched over to the other side of the rad, plugged in and working!!!!

right, think I have found it. the fan has been fitted back on the wrong side at some point it its life and is connected to the AC connector!

so think thats an easy fix!

just need to get it back from the garage who are trying to find why its failing on emissions.

I took my car for an MOT yesterday and was having trouble getting it to pass emissions. while doing this we noticed the engine temp getting very near the red on the gauge and the main rad fan had not kicked in so had to abort the test. I got home and checked the fan by giving it 12v and it was fine....

please can we all put £1 in each and buy that completly rusty Exedy clutch just to stop it keep popping up on anyones saved MR2 search each week! :D Who on earth would buy something that rusty, let alone a clutch and then spend all that time fitting it to their car! :neutral: it looks like its been ...

I had this exact same issue a few months ago. was driving me mad. a few days with the noise I noticed the trim miles were sticking at 99miles and not going to 100 (thought the MPG was bad!). I reset it and it never came back!

how close are they? I changed my pads at the weekend and it looked like the new ones would not fit bit it was due to rust build up behind the stainless steel guides that clip into the caliper. I took these off and cleaned the rust off. Some had built up and stuck on the SS guides too. Once removed t...

I eventually picked up the new part at Toyota. It had been there for ages despit me going in twice to see where it was but they had it under the wrong name! Do that many people really order that part to not figure what had happened! booked a test drive in a GT86 so not a waist of time! Got it switch...

cheers harold, thats great. I was worried there would be more tricky screws like the three that hold the mirror on.

Hi Ive just ordered one for the passengers side as the noise is driving me nuts and I tried the foam idea but it just made it worse :-( The people who have replace this brkt please could you suggest any tips or things to watch out for. Does the door card have to come off? having tried the foam fix I...

it sounds like you could have clutch drag to me. Does the gear engagement feel normal when the engine is switched off?

I'd be checking the slave and master cylinder for leaks before a gearbox

Ive gone a bit pingi mad and my car doesnt even leak! I got them to prevent any moisture at all damaging and aging the inside so there are two 450g ones in the inside cabin, a 250g one in the boot (hopefully help keep the ECU nice and dry) and another 250g one in the frunk. do I hold the MR2 pingi r...

cheers guys, that helps confirm that its not been touched before. just need to work out what will get them back to black.

Do you know if black paint (stone protection type stuff) along the bottom of the sills is standard fitment to UK MK2 rev2's? I've looked at google images and some have it fitted and some don't. Is it a sign the sills have been worked on before and as sill issues are so common many MR2's have a simil...

I used to have a celica GT4 (st165) and it used to make a stange noise for a few seconds the first time you pulled away after it had sat somewhere for a while, it sounds like an electric pump noise to me more than an air noise. the car could be ticking ofer for ages and not make the noise but it wou...