www.imoc.co.uk

OK, so I used the BGB as a reference and checked the resistance of the ECU Coolant Sensor, when cold and when warm, and the readings are as the book. So we can rule out the sensor. Its feeding the signal to the ECU as well, cos pulling the connector off nearly stalls the engine when cold. What about...

Thanks, I thought that may have been the case, which begs the, perhaps dumb question, do Rev 3-5 have a cold start injector?

I'm trying to narrow down some running problems. If there is no cols start injector it would make life an awful lot easier Having no AFM also makes fault finding easier

Exactly as the title. I've seen photos of N/A and Rev 1 Tubbys, but on my Rev 3 the switch just ain't there. All I can see is the 2 Temp sensors for ECU and dash.

My car is having problems and I'm just trying to fault find.

I found the sensor..... I think, But my Rev 3 Turbo coolant pipe isn't anything like the ones shown. It only has one sensor on it. Where are the Coolant temp and Cold start switch sensors on a REV 3?

Which temp sensor is that? There are a lot on the engine. I could test it with the multimeter following the BCB, if I knew which one.

I'm asking cos I'm colour blind, and I'll struggle picking out a green one from a grey one.

O2 sensor shouldn't cause the engine to misfire should it? Or loose power? I dunnu where the fuel pump is or how to check it. Looks like I best check the Knowledge base and make a cuppa.... long day I think.

OK, kinda long, but I wanna be as helpful as I can with information. So driving to work, all cosy and warm in my car. Pull out from the lights after 10 mins of driving and the car starts stuttering and running well rough, like I'm pulling off from the lights in 5th, not 1st. The engine would rev but...

Found this on ebay, for sale of some front lense indicator looms: TOYOTA MR2 MK2 SIDE LIGHT AND INDICATOR LOOMS TOYOTA MR2 MK2 FRONT SIDE LIGHTS AND INDICATOR LOOMS AND BULB HOLDERS ( IF I CAN FIND SOME BULBS I WILL THROW THEM IN ) . IDEAL FOR NEWLY IMPORTED MR2'S THAT DON'T HAVE ANY SIDE LIGHTS WH...

Sorry, your wrong..... ....raise the level at which it breaks away.... ....inexperienced drivers in the wet ..... So it improves the stability of the car then :D :D Yeah, your right though, any inexperienced driver, in the wet, can skid a car. Its not the fault of the MR2 Turbo though, is it? So yo...

Having owned (and driven HARD :D ) a 3SGE and 3SGTE (N/A and Turbo) The turbo is far, far better. You can enjoy the drive more because you have the power to pass slow moving traffic and not get stuck in queues. Plus the power band is very wide (nearly twice the torque in a turbo), unlike the N/A. Pl...

Sorry, the reverse lights don't come on. What I mean, is that it passed a continuity test on the multimeter when the reverse gear was engaged.

Yeah, I've checked the switch. like I said, I've followed the fault finding guide from the knowledge base. Just wondering if anyone has any experience with the loom.

OK, pretty much as the title. I checked the knowledge base article, regarding fault finding the reverse lights. I checked my bulbs, both ok. I checked the fuse, its fine. I checked the switch & bridged the connector during testing. OK. So what else is there? I've been going through this again an...

I went into Toyota, they said these where UK blanking strips (A search of the forum seems to confirm this??) I was quoted a similar price, but in black, they said 2 days delivery.

I'm confused

GTS Chris accepts cards But you have to ring up and do the whole transaction over the phone

??? Opening the Bonnet is the same as any other car, its the lever in the drivers footwell

I don't know why on earth you'd pay that much for an elbow, when a complete berk downpipe, with flexi section, fitting kit, gaskets and mount, From GTS Chris, s is only £129.00... A shocking £55 cheaper for twice as much.

Cheers Buddy, your a life saver. Should be able to get my car back on the road..... assuming Toyota have em....

So I'm taking off my bomex style front bumper and taking it back to standard. Problem is I NEED these little pieces that go infront of the toblerones. My car paint is 202 Astral Black. Does anyone know the part number, I could order these from Mr T if I had too. http://farm4.static.flickr.com/3180/2...

Hi, I spent last weekend doing the exact same job. Took me 8 hours, and now the engine runs hot. But it sounds awesome :D I used a long 14mm Socket (sparkplug socket length) on a 1/2" drive, if we're talking bottom left (marked as 2). I used stepped ring spanner on number one though. http://www...