Mr2 turbo tin top advert Reg m108XKU

Discussion and technical advice the SW20 MR2. 3S-GTE, 3S-GE, 3S-FE etc
Anything and everything to do with maintenance, modifications and electrical is in here for the Mk2.

Moderators: IMOC Moderators, IMOC Committee Members

Post Reply
headrushuk
Posts: 85
Joined: Tue Jun 30, 2015 6:46 pm

Mr2 turbo tin top advert Reg m108XKU

Post by headrushuk »

anyone know this guys car he got for sale had loads of work done to it but hes not on forums which is odd https://www.facebook.com/darren.p.watso ... nref=story

Up for sale is my forged rev 3 tin top turbo!
This I's a awesome mr2 spec as follows.

Engine.
Wossner forged piston set 86.5mm ...
Acl race crankshaft bearing set
Full genuine gasket set but uprated headgasket
Genuine oil pump
Genuine water pump
New timing belt
New silicone water hoses
Japspeed 3 inch twin back box system
3 inch decatt (nice and thick)
Hks mushroom filter
Hks actuator
Arc sidemount intercooler
TRD shortshift gearbox with redline mt90 synthetic gearbox oil. Been the rev 3 equipped with the LSD diff
Engine was rebuilt 14k miles ago by S bits. Invoice for work here.
Rebuilt ct20 turbo boosting at 1.1 bar. Holds and pulls strong car is running around 300 bhp.
Serviced every 3k with millers 5.40 nanodrive.
Was serviced 200 miles ago. Your welcome to check.

Paintwork and body

Paint is very good for age. Gets washed weekly and polished with meguires products.

Sard mc4 front bumper with carbon vents
Toms rear bumper
Airwalker sideskirts
Bomex rear wing
Flared front wings and carbon vents
Custom diffuser. Never saw another like it
Custom bonner side vents
Honda nsx raybrig crystal lenses with sleepy eye kit.
Smoked front lenses
Carbon side vents
TRD plate sarround

Wheels and brakes

Rota 17 custom painted about 2 months ago. Falken 235 40 rears and falken 215 40 fronts. All with great tread. Not very old.

New front calipers with dimpled and grooved discs with new yellow stuff pads
Genuine new toyota wheel nuts.
Tein superstreet coilovers

Interior

TRD carbon clocks converted to mph
TRD boost gauge
TRD oil temp gauge
TRD water temp gauge
TRD shortshift
Apexi air flow converter
Custom pillar pod
Deepdish drift steering wheel
Custom trimmed in audi leather. Seats and centre console. Very nice.
Optional rear toyota boot matt
6 month old eonon dvd player

A in all a cracking mr2 turbo.

However there is a couple of very minor faults what I will mention

Front bumper been very low has caught at each end. Only slightly damaged easily done at a bodyshop. Also rear centre plate in between rear lights needs a paint. Had a silly turbo badge on which I took off. Planned to buy a carbon one off carbon Ben to finish car off but never got round to it.
Exhaust flexi section is abit rattly on certain revs wen cruising along steadily.

Other than the 3 things they are the only faults with the car.

Mot until March 2016

Will of missed loads off. Viewing is recommended I fell in love with it as soon as I saw it. Very unique car with thousands spent and never needed for nothing.
headrushuk
Posts: 85
Joined: Tue Jun 30, 2015 6:46 pm

Re: Mr2 turbo tin top advert Reg m108XKU

Post by headrushuk »

Image[/url]
headrushuk
Posts: 85
Joined: Tue Jun 30, 2015 6:46 pm

Re: Mr2 turbo tin top advert Reg m108XKU

Post by headrushuk »

Image
MR2 Turbo Boy
Posts: 1052
Joined: Wed Aug 15, 2012 8:03 pm
Location: Definitely NOT at Pete Gibbens garage

Re: Mr2 turbo tin top advert Reg m108XKU

Post by MR2 Turbo Boy »

TRD shortshift gearbox with redline mt90 synthetic gearbox oil. Been the rev 3 equipped with the LSD diff
Engine was rebuilt 14k miles ago by S bits. Invoice for work here.



Why don't you ask Pete@ Sbits... for any information that could be helpful to you..

:thumleft:
craig
Posts: 43936
Joined: Sat Dec 18, 2004 3:44 am

Re: Mr2 turbo tin top advert Reg m108XKU

Post by craig »

Believe this was rob Brooke's old motor. He was on here. Have a search in member profiles.
C35Rob
Posts: 2108
Joined: Wed Dec 04, 2013 1:14 am
Location: Gateshead

Re: Mr2 turbo tin top advert Reg m108XKU

Post by C35Rob »

I had a look around this when it was parked up at teeside autodrome drift day a couple of months ago, other than the paint looking a bit flat (although that may have been polished up by now) and the interior not being to my taste it looks like a solid car, it was seeing this in person that made me decide to keep/fit my "bomex" wing
EX MR2 owner, currently on a '00 Honda CBR600 Follow me on Instagram @c35rob
CalMac
Posts: 1747
Joined: Mon Jan 14, 2013 7:08 pm
Location: Northampton

Re: Mr2 turbo tin top advert Reg m108XKU

Post by CalMac »

How much is it? Looks worth about 4k to me
Peter Gidden
IMOC Affiliated Trackday Organiser
Posts: 10506
Joined: Tue Jan 25, 2005 9:49 am
Location: South Yorkshire

Re: Mr2 turbo tin top advert Reg m108XKU

Post by Peter Gidden »

Thought OP had bought a car off ebay... :?
aussieGT
Posts: 1249
Joined: Fri Mar 12, 2010 4:17 am
Location: Staffs/Stoke

Re: Mr2 turbo tin top advert Reg m108XKU

Post by aussieGT »

Peter Gidden - SBITS wrote:Thought OP had bought a car off ebay... :?


Think he's starting a collection.
Post Reply

Return to “MR2 MK2 1990 - 1999 NA & Turbo”