I am putting a thread in each of the 3 forums.
As most of you are aware we have a very nice selection of products for you MK2 owners. We manufacture a lot of products in both carbon and fibreglass covering most of the exterior and interior. It has been a while since we manufactured anything new and i'd like to keep on the ball and keep supplying you all with excellent quality parts.
Is there anything else you'd like to see from us?
CarBen Fibre Creations MK2 Part Discussion
Moderators: IMOC Moderators, IMOC Committee Members
-
- Posts: 1257
- Joined: Thu Jul 26, 2007 12:12 pm
- Location: Leeds
CarBen Fibre Creations MK2 Part Discussion
Our Discounts/Specials:
http://www.carbenfibrecreations.co.uk/specials
http://www.carbenfibrecreations.co.uk/specials
Re: CarBen Fibre Creations MK2 Part Discussion
Can you do polyurethane yet? I have a feeling PU splitters would be very popular
Re: CarBen Fibre Creations MK2 Part Discussion
Polyurathene Aeroware front lips are massively popular in the USA and get quite costly to import. No one else makes them in the UK.
Re: CarBen Fibre Creations MK2 Part Discussion
Donato wrote:Polyurathene Aeroware front lips are massively popular in the USA and get quite costly to import. No one else makes them in the UK.
Just about to order a batch...if anyone else wants to join the GB it will bring the price down even further, current £150 each including international postage and taxes (you need to be quick though!)
http://www.imoc.co.uk/forums/viewtopic.php?t=182684
Re: CarBen Fibre Creations MK2 Part Discussion
Think you should come pick up my ask full carbon bonnet (from mk) .. make molds .. and make lots of money .. had lot of interest if i could post ... http://www.imoc.co.uk/forums/viewtopic.php?t=179437
-
- Posts: 1844
- Joined: Sun Jan 30, 2005 1:22 pm
Re: CarBen Fibre Creations MK2 Part Discussion
Replacement panels in the door cards made of carbon fibre that would replace the alcantara section in turbo cars.
Re: CarBen Fibre Creations MK2 Part Discussion
JD wrote:Can you do polyurethane yet? I have a feeling PU splitters would be very popular
I would defo b interested in this i hate fibreglass and carbon they just fade crack break warp long term wise
MR2 REV 3 TURBO 450BHP
3000GT VR4 TT 500BHP
EVO X FQ360
3000GT VR4 TT 500BHP
EVO X FQ360
Re: CarBen Fibre Creations MK2 Part Discussion
slipping clutch wrote:Replacement panels in the door cards made of carbon fibre that would replace the alcantara section in turbo cars.
Or even full carbon door cards. I've seen them before, just don't seem available any longer
-
- Posts: 1257
- Joined: Thu Jul 26, 2007 12:12 pm
- Location: Leeds
Re: CarBen Fibre Creations MK2 Part Discussion
JD wrote:Can you do polyurethane yet? I have a feeling PU splitters would be very popular
We dont at the moment but I can look into it. What other style splitters are popular we only do Aeroware and Greddy
2mad wrote:Think you should come pick up my ask full carbon bonnet (from mk) .. make molds .. and make lots of money .. had lot of interest if i could post ... http://www.imoc.co.uk/forums/viewtopic.php?t=179437
If people would be interested in one I'd make them
slipping clutch wrote:Replacement panels in the door cards made of carbon fibre that would replace the alcantara section in turbo cars.
Already working on this, I am trying to source a set of excellent fitting door cards to do that small replacement and also a full door card. If anyone can help please get in touch
Our Discounts/Specials:
http://www.carbenfibrecreations.co.uk/specials
http://www.carbenfibrecreations.co.uk/specials
Re: CarBen Fibre Creations MK2 Part Discussion
MR2 REV 3 TURBO 450BHP
3000GT VR4 TT 500BHP
EVO X FQ360
3000GT VR4 TT 500BHP
EVO X FQ360
-
- Posts: 185
- Joined: Wed Jul 27, 2011 2:58 pm
- Location: Glasgow
Re: CarBen Fibre Creations MK2 Part Discussion
Madpsi ducktail bootlid, absolutely gorgeous! No question these would sell here.
Re: CarBen Fibre Creations MK2 Part Discussion
Ginjaninja92 wrote:Madpsi ducktail bootlid, absolutely gorgeous! No question these would sell here.
He already makes these.
Re: CarBen Fibre Creations MK2 Part Discussion
Some carbon wind deflectors would be cool.
Re: CarBen Fibre Creations MK2 Part Discussion
JAAASH wrote:Ginjaninja92 wrote:Madpsi ducktail bootlid, absolutely gorgeous! No question these would sell here.
He already makes these.
He makes a ducktail bootllid, it's not the same as the MadPSI one though.
Re: CarBen Fibre Creations MK2 Part Discussion
Front and side under canards similar to the Vertex/Origin ones that would suit the stock front bumper.
http://www.vertex-usa.com/catalog/Canards/
http://www.enjukuracing.com/products/or ... nards.html
http://www.vertex-usa.com/catalog/Canards/
http://www.enjukuracing.com/products/or ... nards.html
Re: CarBen Fibre Creations MK2 Part Discussion
Gazza_DJ wrote:JAAASH wrote:Ginjaninja92 wrote:Madpsi ducktail bootlid, absolutely gorgeous! No question these would sell here.
He already makes these.
He makes a ducktail bootllid, it's not the same as the MadPSI one though.
My bad. Thought they were the same.
Re: CarBen Fibre Creations MK2 Part Discussion
Nic wrote:Front and side under canards similar to the Vertex/Origin ones that would suit the stock front bumper.
http://www.vertex-usa.com/catalog/Canards/
http://www.enjukuracing.com/products/or ... nards.html
Image Replaced With URL For Quote http://carphotos.cardomain.com/ride_ima ... _large.jpg
+1
-
- IMOC Moderator
- Posts: 10902
- Joined: Sat Dec 10, 2005 1:32 pm
- Location: Bonnie Dundee
- Contact:
Re: CarBen Fibre Creations MK2 Part Discussion
carbon wind deflectors for a t-bar. I reckon everybody would buy a set!
I;m also sure I ask for this every time you put up one of these posts
I;m also sure I ask for this every time you put up one of these posts
Re: CarBen Fibre Creations MK2 Part Discussion
Can you do a gurney style flap /lip like whats on the Evos...for a Rev 3 spoiler ?? , Id be after one of those in Carbon ..just to be a bit different from everyone else
-
- Posts: 185
- Joined: Wed Jul 27, 2011 2:58 pm
- Location: Glasgow
Re: CarBen Fibre Creations MK2 Part Discussion
JAAASH wrote:Gazza_DJ wrote:JAAASH wrote:
He already makes these.
He makes a ducktail bootllid, it's not the same as the MadPSI one though.
My bad. Thought they were the same.
Apologies so he does. Very nice too!