what alloys should i go for

Discussion and technical advice the SW20 MR2. 3S-GTE, 3S-GE, 3S-FE etc
Anything and everything to do with maintenance, modifications and electrical is in here for the Mk2.

Moderators: IMOC Moderators, IMOC Committee Members

Mr2z
Posts: 86
Joined: Sun Jul 20, 2014 11:24 pm
Location: East London

what alloys should i go for

Post by Mr2z »

Hi all I am in TWO minds about what alloys to go for AND WHAT COLOUR FOR my mrk2
The car is blue

sorry in advance as i am new to the group it wont let me put in url

i like these
both from rimluxe.co.uk

Lenso BSX Silver in 15" 7j front 8j back ( what offset should i go for)

or
Axe EX8 Red 15 8j front and back ( again what offset would suit best)

i am looking for an aggressive stance look
any advice and opinion much appricated[/img]
Draven
Posts: 14965
Joined: Fri Feb 10, 2006 8:34 am
Location: One of the Hamptons.
Contact:

Re: what alloys should i go for

Post by Draven »

Welcome.

I would recomend a staggered setup for the MK2. Wider at the rear.. 16" Wheels are the best bet..
Nic
Posts: 1910
Joined: Sat Jan 21, 2012 4:26 pm
Location: UK

Re: what alloys should i go for

Post by Nic »

This wheel calculator should help with widths and offsets http://mr2.gordaen.com/wt_calc.php

Not a fan of cheap quality wheels, my advice would be to source a decent quality set 2nd hand rather than buy new.
Nic
[email protected]
MR2 Rev 3 GT Turbo
Mr2z
Posts: 86
Joined: Sun Jul 20, 2014 11:24 pm
Location: East London

Re: what alloys should i go for

Post by Mr2z »

I don't mind a 2nd hand set I got about 500 to play with what are my chances of finding a set and were do I look
2mad
Posts: 5983
Joined: Sun Feb 28, 2010 12:11 pm
Location: uk

Re: what alloys should i go for

Post by 2mad »

Like, Axe EX8 Red 15 look nice , I had 8jj offset 35 front and 9jj offset 38 with a 5mm spacer fitted to the rear on mine if you check out my pics, I thought my car had a good stance, did have to shave my arches on the rear though. easy enough with a dremol a cutting wheel :mrgreen:

Pic .. http://www.imoc.co.uk/forums/garage.php ... e_id=18577

I had a 10mm spacer kit for the rear, just never got round to fitting it lol



Kev.
danjama
Posts: 640
Joined: Tue Sep 18, 2012 9:28 pm

Re: what alloys should i go for

Post by danjama »

There are loads of decent wheels on ebay at the moment. It just depends what you like the look of. These are a popular choice and seem to have perfect mr2 fitment but will ride a bit harder being 17". I personally prefer 16".

http://www.ebay.co.uk/itm/Advan-avs-17x ... 1c43503b41

I like SA3's but not sure if this fitment will work on mr2's

http://www.driftworks.com/forum/wheels- ... ronts.html

Good price if they will fit and look clean.
Last edited by danjama on Wed Jul 23, 2014 6:32 pm, edited 1 time in total.
2mad
Posts: 5983
Joined: Sun Feb 28, 2010 12:11 pm
Location: uk

Re: what alloys should i go for

Post by 2mad »

I owned a set off these Advan avs wheels before my blitz-03 I wonder if they are my old wheels lol. great looking wheels well worth a look could be painted any colour :mrgreen:

And at the end of the day there advan :clap: \:D/ O:)


The black SA3's super advan would fit fine, mabe a 3mm spacer on the front and 5mm spacer on the rear 8)
danjama
Posts: 640
Joined: Tue Sep 18, 2012 9:28 pm

Re: what alloys should i go for

Post by danjama »

2mad wrote:I owned a set off these Advan avs wheels before my blitz-03 I wonder if they are my old wheels lol. great looking wheels well worth a look could be painted any colour :mrgreen:

And at the end of the day there advan :clap: \:D/ O:)


The black SA3's super advan would fit fine, mabe a 3mm spacer on the front and 5mm spacer on the rear 8)


Sorry i added those after your reply :D

If i had the cash i'd grab those black advans. Maybe if they're still there in a couple of weeks :D
2mad
Posts: 5983
Joined: Sun Feb 28, 2010 12:11 pm
Location: uk

Re: what alloys should i go for

Post by 2mad »

danjama wrote:
2mad wrote:I owned a set off these Advan avs wheels before my blitz-03 I wonder if they are my old wheels lol. great looking wheels well worth a look could be painted any colour :mrgreen:

And at the end of the day there advan :clap: \:D/ O:)


The black SA3's super advan would fit fine, mabe a 3mm spacer on the front and 5mm spacer on the rear 8)


Sorry i added those after your reply :D

If i had the cash i'd grab those black advans. Maybe if they're still there in a couple of weeks :D


SA3's are awesome, wish mine fitted my st205 celica lol
craig
Posts: 43936
Joined: Sat Dec 18, 2004 3:44 am

Re: what alloys should i go for

Post by craig »

Nic
Posts: 1910
Joined: Sat Jan 21, 2012 4:26 pm
Location: UK

Re: what alloys should i go for

Post by Nic »

danjama wrote:There are loads of decent wheels on ebay at the moment. It just depends what you like the look of. These are a popular choice and seem to have perfect mr2 fitment but will ride a bit harder being 17". I personally prefer 16".

http://www.ebay.co.uk/itm/Advan-avs-17x ... 1c43503b41

I like SA3's but not sure if this fitment will work on mr2's

http://www.driftworks.com/forum/wheels- ... ronts.html

Good price if they will fit and look clean.


Agree, 16" would be what I'd go with.

My Supra came with 18" AVS AV5's fitted, they are heavy wheels and brake caliper clearance can be an issue due to the design of the spokes. The SA3's are much lighter in weight and look great on an MR2 IMO.
Nic
[email protected]
MR2 Rev 3 GT Turbo
Mr2z
Posts: 86
Joined: Sun Jul 20, 2014 11:24 pm
Location: East London

Re: what alloys should i go for

Post by Mr2z »

I love the black advan, agree with you guys 16 is ideal for the mr2. From past experience on my fto went from 16 to 18 and boy it was like driving a different car in a bad way.

Kev how were the advan on your mr2
Mr2z
Posts: 86
Joined: Sun Jul 20, 2014 11:24 pm
Location: East London

Re: what alloys should i go for

Post by Mr2z »

Stupid drift works won't let me msg the person as I am a new member :-(
2mad
Posts: 5983
Joined: Sun Feb 28, 2010 12:11 pm
Location: uk

Re: what alloys should i go for

Post by 2mad »

Mr2z wrote: Kev how were the advan on your mr2


Both sets were Superb :mrgreen: SA3's were my favorite though, lovely wheels :thumleft:

Both sets and my blitz were 17" must admit I thought they drove great, mabe a small amount of tramlining every so often, nothing that ever worried me though.
Last edited by 2mad on Wed Jul 23, 2014 8:00 pm, edited 1 time in total.
Mr2z
Posts: 86
Joined: Sun Jul 20, 2014 11:24 pm
Location: East London

Re: what alloys should i go for

Post by Mr2z »

can i ask a big favour of any one that has a drift works acount please get me a contact email or number for the member thtas selling those black advan
Nic
Posts: 1910
Joined: Sat Jan 21, 2012 4:26 pm
Location: UK

Re: what alloys should i go for

Post by Nic »

Mr2z wrote:can i ask a big favour of any one that has a drift works acount please get me a contact email or number for the member thtas selling those black advan


I've sent the seller of the SA3 wheels on Driftworks a pm asking for a contact email address, I'll pm you when I get an answer.
Nic
[email protected]
MR2 Rev 3 GT Turbo
Mr2z
Posts: 86
Joined: Sun Jul 20, 2014 11:24 pm
Location: East London

Re: what alloys should i go for

Post by Mr2z »

thank you nic
danjama
Posts: 640
Joined: Tue Sep 18, 2012 9:28 pm

Re: what alloys should i go for

Post by danjama »

:thumleft:
Mr2z
Posts: 86
Joined: Sun Jul 20, 2014 11:24 pm
Location: East London

Re: what alloys should i go for

Post by Mr2z »

great find mr danjama :)
danjama
Posts: 640
Joined: Tue Sep 18, 2012 9:28 pm

Re: what alloys should i go for

Post by danjama »

Mr2z wrote:great find mr danjama :)


All good mate :thumleft:

Where are you in East London? I'm near East Ham. Seen a few mr2's around here recently. Nice black turbo near my house actually though not had the pleasure of meeting the driver yet.
Post Reply

Return to “MR2 MK2 1990 - 1999 NA & Turbo”