Mid life crisis solved!... I hope :)
Moderators: IMOC Moderators, IMOC Committee Members
-
- Posts: 43
- Joined: Tue Nov 19, 2013 12:14 am
- Location: Norfolk
Mid life crisis solved!... I hope :)
Been a fan of the MR2 for many years. A boss of mine had one years back and always loved the styling, but never thought to own one...until November.
Browsing autotrader and came across a rev2 tubby for under £800 and thought fancy something I can tinker with at weekends and use on track days. so took the punt based on being told engine had new clutch, cambelt and water pump and main issues were body finish and brakes. As always no guarantees, but thought I would take the punt.
Got home and started the strip down. Close up finish is real bad but otherwise appeared sound.
Plan of attack was just to take apart and see what I had got myself into...
1st Job....sort out the sills on both sides then new front end......
Browsing autotrader and came across a rev2 tubby for under £800 and thought fancy something I can tinker with at weekends and use on track days. so took the punt based on being told engine had new clutch, cambelt and water pump and main issues were body finish and brakes. As always no guarantees, but thought I would take the punt.
Got home and started the strip down. Close up finish is real bad but otherwise appeared sound.
Plan of attack was just to take apart and see what I had got myself into...
1st Job....sort out the sills on both sides then new front end......
Re: Mid life crisis solved!... I hope :)
Fixed the links for you
Looks like your going to get your hands dirty, it does look like a good project though, have fun and looking forward to the end results
Looks like your going to get your hands dirty, it does look like a good project though, have fun and looking forward to the end results
Re: Mid life crisis solved!... I hope :)
Did you manage to get the border bumper fitted...
I've still got your old bumper gathering dust in my workshop
Good to see you have started a thread for your tubby...
I've still got your old bumper gathering dust in my workshop
Good to see you have started a thread for your tubby...
-
- Posts: 43
- Joined: Tue Nov 19, 2013 12:14 am
- Location: Norfolk
Re: Mid life crisis solved!... I hope :)
Thanks Martin. How Should I be posting in future? Would not want you having to fix my future posts
Hey Phil. Playing catchup. Be good to see the old bumper after you finish the planned mod. Been meaning to start a thread for some time. Lots of help along the way from members already to my various posts for help...great forum!
Hey Phil. Playing catchup. Be good to see the old bumper after you finish the planned mod. Been meaning to start a thread for some time. Lots of help along the way from members already to my various posts for help...great forum!
Re: Mid life crisis solved!... I hope :)
When posting a link to an image you need to put it in
for example
This will make the image appear rather than just the link..
There is a handy litlte button under the subject. if you just highlight the link and click it they will pop up.
for example
This will make the image appear rather than just the link..
There is a handy litlte button under the subject. if you just highlight the link and click it they will pop up.
-
- Posts: 43
- Joined: Tue Nov 19, 2013 12:14 am
- Location: Norfolk
Re: Mid life crisis solved!... I hope :)
Removed the side skirts to reveal the sills. Got busy with a screwdriver and started to make a lot of holes, both sides.
Out with the disc cutter to remove offending rot
Happy with the result given home garage setup. Objective was to stop the rot and ensure it was solid and treated...at least for now. It all gets covered back up with the side skirts so did not need it to be showroom!
next was engine service. Fluids, filters, plugs etc. Also sorted some crazy wiring to the rear light clusters and in the frunk to horns and old spots. General tidy up.
Now off to attack the brakes!
Out with the disc cutter to remove offending rot
Happy with the result given home garage setup. Objective was to stop the rot and ensure it was solid and treated...at least for now. It all gets covered back up with the side skirts so did not need it to be showroom!
next was engine service. Fluids, filters, plugs etc. Also sorted some crazy wiring to the rear light clusters and in the frunk to horns and old spots. General tidy up.
Now off to attack the brakes!
Re: Mid life crisis solved!... I hope :)
nice job on the sills - how long did that take?
-
- Posts: 43
- Joined: Tue Nov 19, 2013 12:14 am
- Location: Norfolk
Re: Mid life crisis solved!... I hope :)
Thanks....
Half day making holes and cutting n shaping new material. Good 4 hours of welding and finishing. Then quick paint. One full on day!
Half day making holes and cutting n shaping new material. Good 4 hours of welding and finishing. Then quick paint. One full on day!
-
- Posts: 43
- Joined: Tue Nov 19, 2013 12:14 am
- Location: Norfolk
Brakes all round
Still playing catchup with my posts.... Moved on to brakes. As the car had sat for about a year I did not have high hopes and on the drive home it was pulling all over the place, so suspected one or two callipers had seized.
As it turns out every corner was in a similar condition. Ended up having to re-con the sliders, but fortunately all pistons worked ok.
After a few hours of reading the various posts on the forum I decided to go ahead and replace all with OEM discs and yellow stuff pads. Seems to be the consensus choice for a 1st time out track car.
While I was at it I bought some v.h. temp paint to tidy up to look of the callipers and sliders.
Fingers crossed the choices pay of when I finally get the car to the track!
As it turns out every corner was in a similar condition. Ended up having to re-con the sliders, but fortunately all pistons worked ok.
After a few hours of reading the various posts on the forum I decided to go ahead and replace all with OEM discs and yellow stuff pads. Seems to be the consensus choice for a 1st time out track car.
While I was at it I bought some v.h. temp paint to tidy up to look of the callipers and sliders.
Fingers crossed the choices pay of when I finally get the car to the track!
Re: Mid life crisis solved!... I hope :)
Great job on the calipers! looking like a good save this
-
- Posts: 43
- Joined: Tue Nov 19, 2013 12:14 am
- Location: Norfolk
PP Roll Cage and Interior
Spotted PP Cage for sale on forum, thanks George_M for sorting me out
Also want to credit Ashley for a top thread on how to fit these.
Striped out the interior and made a trial fit, marked out the positions and made pilot hole's etc.
Back out with the Mig and sorted the base plates, fabricated a few extra plates just to tidy and then re-finished in factory red.
Also went ahead and welded in the race harness eyelet brackets and then fitted and bolted in the roll cage. Had to make a few last minute mods to the headlining etc to get it all to fit snug!
Then in with the interior and the new bucket seats. Had to build the subframes though as not sold with any . Then managed to get the T-bar glass back into position, again with a few mods.
Only challenge was to bolt the back plates of the cage where they meet the fire wall. Looks like I would need to remove the intercooler to be able to bolt them in on the drivers side to complete the install
Also want to credit Ashley for a top thread on how to fit these.
Striped out the interior and made a trial fit, marked out the positions and made pilot hole's etc.
Back out with the Mig and sorted the base plates, fabricated a few extra plates just to tidy and then re-finished in factory red.
Also went ahead and welded in the race harness eyelet brackets and then fitted and bolted in the roll cage. Had to make a few last minute mods to the headlining etc to get it all to fit snug!
Then in with the interior and the new bucket seats. Had to build the subframes though as not sold with any . Then managed to get the T-bar glass back into position, again with a few mods.
Only challenge was to bolt the back plates of the cage where they meet the fire wall. Looks like I would need to remove the intercooler to be able to bolt them in on the drivers side to complete the install
-
- Posts: 1844
- Joined: Sun Jan 30, 2005 1:22 pm
Re: Mid life crisis solved!... I hope :)
Good work, just read your thread from the beginning. That looks like a mighty tight squeeze to get the tbars back in though.
Last edited by slipping clutch on Fri Apr 18, 2014 8:47 pm, edited 1 time in total.
Re: Mid life crisis solved!... I hope :)
Blimey you seem to have got alot done in such a short space of time
great work
great work
-
- Posts: 43
- Joined: Tue Nov 19, 2013 12:14 am
- Location: Norfolk
Re: Mid life crisis solved!... I hope :)
Not that quick, been working on it since Back end last year, Playing catchup with thread as I get time over last week or so.
More to follow
More to follow
-
- Posts: 43
- Joined: Tue Nov 19, 2013 12:14 am
- Location: Norfolk
intercooler
In order to finish the roll cage installation I needed to remove the Intercooler. Decided that I might as well upgrade it given the effort to take the factory one out.
Decided that in order to give me as much room as possible I would go ahead and remove the AC pump and pulleys while at it. Made a whole load of difference, created plenty of space and the IC and plastic shroud came out fairly easily after.
Completed the roll cage install with firewall bolts and spreader plate then made up a new shroud for the upgraded IC and bolted it in. Took some playing around with the pipes and clips but got there in the end.
Quick run up and all appears good...time will tell, once I finally get it out onto the road.
Decided that in order to give me as much room as possible I would go ahead and remove the AC pump and pulleys while at it. Made a whole load of difference, created plenty of space and the IC and plastic shroud came out fairly easily after.
Completed the roll cage install with firewall bolts and spreader plate then made up a new shroud for the upgraded IC and bolted it in. Took some playing around with the pipes and clips but got there in the end.
Quick run up and all appears good...time will tell, once I finally get it out onto the road.
-
- Posts: 1618
- Joined: Wed Jul 25, 2007 10:15 pm
- Location: NEWBURY BERKS
Re: Mid life crisis solved!... I hope :)
Is your ac condenser any good ?
One day the Phoenix will rise from the ashes.
-
- Posts: 43
- Joined: Tue Nov 19, 2013 12:14 am
- Location: Norfolk
Re: Mid life crisis solved!... I hope :)
Unfortunately condenser is scrap! Pretty much dismantled itself
Re: Mid life crisis solved!... I hope :)
I had that HKS Super Sound BOV best dump valve ever !
Belongs on a old school jdm car
Belongs on a old school jdm car
-
- Posts: 43
- Joined: Tue Nov 19, 2013 12:14 am
- Location: Norfolk
Body pre paint
Lucked out with the HKS BOV, came with the car. Immediately liked the sound
With interior sorted and IC in place remaining time was spent getting the body into shape.
Refitted the side skirts and front bumper with bond and rivets. Used up a tin of P38 sorting out all of the deep scuff's, scrapes and dents, then spent HOURS with various grit wet n dry and filler primer to get best finish possible.
Got some grey primer rattle cans and prepared the front bumper, then got carried away and decided to do the lot then used 800 grit to flatten smooth.
With interior sorted and IC in place remaining time was spent getting the body into shape.
Refitted the side skirts and front bumper with bond and rivets. Used up a tin of P38 sorting out all of the deep scuff's, scrapes and dents, then spent HOURS with various grit wet n dry and filler primer to get best finish possible.
Got some grey primer rattle cans and prepared the front bumper, then got carried away and decided to do the lot then used 800 grit to flatten smooth.
Re: Mid life crisis solved!... I hope :)
Looking great.