We've got a few types of wheel spacer we get profile-cut from 6082 T6 aluminium sheet so FAR higher quality than the common multifit type you see, but still remember you may need longer wheel bolts/studs (esp if going more than 2mm as a guide).
We have three types at the moment:
- 2.0mm thick
- 4x100 PCD (Mk1 and Mk3 MR2)
- 145mm diameter
- 66.1mm bore
- 130g/pr (plus packaging)
- £19.20+vat pr, £2.00+vat p/p (free UK Zone 1 p/p if you buy 4)
- 4.0mm thick
- 5x114.3 PCD (Mk2 MR2)
- 150mm diameter
- 67.1mm bore
- 280g/pr (plus packaging)
- £23.80+vat pr, £2.00+vat p/p (free UK Zone 1 p/p if you buy 4)
- 4.0mm thick
- 4x114.3 PCD (Lancer Evo etc!)
- 150mm diameter
- 67.1mm bore
- 285g/pr (plus packaging)
- £23.80+vat pr, £2.00+vat p/p (free UK Zone 1 p/p if you buy 4)
Might be handy if people want something nicer than the nasty cast chinese jobs.
WMS Brakes-> Mk1, 2, 3 wheel spacers
Moderators: IMOC Moderators, IMOC Committee Members
-
- Posts: 498
- Joined: Fri Feb 04, 2005 11:17 am
- Location: WMS Brakes - Bexhill, S.E. UK
- Contact:
WMS Brakes-> Mk1, 2, 3 wheel spacers
WMS 4 pot brake kits in Affiliates! Mk1: www.imoc.co.uk/forums/viewtopic.php?t=128889 & Mk2: www.imoc.co.uk/forums/viewtopic.php?t=140657