I am about to start my Rev2 turbo to Rev4 UK transplant and want to fit (amongst other things) a new Cometic HG to the turbo head whilst the engine is out.
The engine will also have a CT20B turbo fitted and Rev 3 cams (if they are deemed to be worthwhile) and we will be upping the boost to 1.0 / 1.1 bar
What thickness HG should I be looking at? I have seen this on ebay but I am not sure if it is the right one.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... TQ:GB:1123
[Mk2] [Turbo] What thickness Cometic HG?
Moderators: IMOC Moderators, IMOC Committee Members
Re: [Mk2] [Turbo] What thickness Cometic HG?
Just fit a stock Rev 3 turbo gasket, saves some money
-
- IMOC Affiliated Trackday Organiser
- Posts: 10506
- Joined: Tue Jan 25, 2005 9:49 am
- Location: South Yorkshire
Re: [Mk2] [Turbo] What thickness Cometic HG?
Chris wrote:Just fit a stock Rev 3 turbo gasket, saves some money
+1
Re: [Mk2] [Turbo] What thickness Cometic HG?
Thank you for the advice guys.
Money saving on a benefits budget is good news indeed!
And the best place to buy one? A local motor factors?
Money saving on a benefits budget is good news indeed!
And the best place to buy one? A local motor factors?
-
- IMOC Affiliated Trackday Organiser
- Posts: 10506
- Joined: Tue Jan 25, 2005 9:49 am
- Location: South Yorkshire
Re: [Mk2] [Turbo] What thickness Cometic HG?
CJ wrote:And the best place to buy one? A local motor factors?
MrT about £45.00. If you get stuck i keep them in stock.