Thought i'd put some info on my latest project on here and see if it qualifies
2001 202 Black Mr2
1MZ all alloy V6
Apexi induction kit
Ferrari F355 exhaust and custom downpipes
Mk2 S54 tranny with Mk3 LSD and ST182 final drive
TTE lowering springs (not fitted yet)
17" Wolfrace alloys with Marangoni Zeta Lineas about to be fitted.
Lots of custom bits to fit the engine and gear shifter etc.
And here's how it sounds :
http://www.youtube.com/watch?v=r-dSXCyBAM8
http://www.youtube.com/watch?v=iYF3sKfliSA
Will be getting it MOT'd this week coming and then just needs some tax and i can see how well it goes on the road and give it some real revs
Black Bob Jnr - Mk3 V6
Moderators: IMOC Moderators, IMOC Committee Members
-
- Posts: 7608
- Joined: Sun Nov 13, 2005 6:28 pm
- Location: Newbury
Re: Black Bob Jnr - Mk3 V6
looking and sounding good.
Hurry up and fit the lowering kit, it does look a little high!
Hurry up and fit the lowering kit, it does look a little high!
Re: Black Bob Jnr - Mk3 V6
Very nice
Re: Black Bob Jnr - Mk3 V6
Yeah it's been suspended on the lift for a month too so the suspension is sitting high anyways.
Will try and get the suspension done right after the MOT but got a Mk2 turbo clutch job to do next week.
Will try and get the suspension done right after the MOT but got a Mk2 turbo clutch job to do next week.
Re: Black Bob Jnr - Mk3 V6
Looks great, I like the MK3's after a little tweaking
Re: Black Bob Jnr - Mk3 V6
Filled the car up with coolant today, fans are cutting in and out at the right time, and it sits at a nice temp. Idle's sitting at 2k but i've still to clean the ISCV, that should drop it back to about 1k.
Coupla vids with it up to temp. Listen to this thing sing
http://www.youtube.com/watch?v=Fv0o4OD4a-Q
http://www.youtube.com/watch?v=3GX2ptGLYrE
Wish the camera could pick up the whole noise, it's braw
Coupla vids with it up to temp. Listen to this thing sing
http://www.youtube.com/watch?v=Fv0o4OD4a-Q
http://www.youtube.com/watch?v=3GX2ptGLYrE
Wish the camera could pick up the whole noise, it's braw
-
- Posts: 3426
- Joined: Wed Dec 15, 2004 1:53 am
- Location: Warwickshire
Re: Black Bob Jnr - Mk3 V6
I have a strange suspicion its going to be quick !!! sounds nice mate !!!
It goes..Uhn tiss Uhn tiss Uhn tiss
-
- Posts: 2114
- Joined: Sun Sep 10, 2006 8:41 pm
- Location: Blackburn (Home of the mighty Rovers)
Re: Black Bob Jnr - Mk3 V6
Have you got a lightenend flywheel in there as well?
Re: Black Bob Jnr - Mk3 V6
Certainly have mate, Chromoly F1 flywheel from the states. It's light but it's hard, had to get the flywheel bolt holes spark eroded to the correct PCD.
Had another drive of this on the way home from the MOT centre, it really, really shifts.
Upsets a lot of folk too, they don't like seeing a wee girly convertable go and sound like that it seems
Had another drive of this on the way home from the MOT centre, it really, really shifts.
Upsets a lot of folk too, they don't like seeing a wee girly convertable go and sound like that it seems
Re: Black Bob Jnr - Mk3 V6
Looks and sounds great. I love the exhaust.
-
- Posts: 2114
- Joined: Sun Sep 10, 2006 8:41 pm
- Location: Blackburn (Home of the mighty Rovers)
Re: Black Bob Jnr - Mk3 V6
Not that it would be pactical but i`d love to here this with a lightend crank and rods/pistons.
The noise from a free reving v6 with that exhaust would probably ending up sounding very similar to a super car.
The noise from a free reving v6 with that exhaust would probably ending up sounding very similar to a super car.
Re: Black Bob Jnr - Mk3 V6
It revs very freely as it is, it amazed me when i 1st saw one do it's thing.
Throttle bodies are what is needed
Throttle bodies are what is needed
Re: Black Bob Jnr - Mk3 V6
Car's now fully MOT'd and working bob on
Just needs taxed and then i can take it out and give it some proper beans.
Did another little vid when i got it home : http://www.youtube.com/watch?v=IVkqCFhO-k0
It's strange driving it, under anything up to 3/5ths throttle it just sounds like a nice warm engine, then when you give it WOT it just barks at you. I love it.
Just needs taxed and then i can take it out and give it some proper beans.
Did another little vid when i got it home : http://www.youtube.com/watch?v=IVkqCFhO-k0
It's strange driving it, under anything up to 3/5ths throttle it just sounds like a nice warm engine, then when you give it WOT it just barks at you. I love it.
Re: Black Bob Jnr - Mk3 V6
Roll on next weekend and i can get this on the road. Took some more pics after a good clean.
www.OlberMOTIVE.com - Central Scotlands answer to your Mr2 needs.
Re: Black Bob Jnr - Mk3 V6
Fantasic
Get booked on TS for the 6th of feb, i want a pax lap
Get booked on TS for the 6th of feb, i want a pax lap
Re: Black Bob Jnr - Mk3 V6
I'll be there for some passenger laps myself but won't be on track. Need the uprated alloy rad before i even think about putting the car through that.
It will be on track soon though. You booked on mate?
It will be on track soon though. You booked on mate?
www.OlberMOTIVE.com - Central Scotlands answer to your Mr2 needs.
Re: Black Bob Jnr - Mk3 V6
Yea I am booked on mate. You are welcome to take mine for a blast if you want. Just sign on as a driver
Re: Black Bob Jnr - Mk3 V6
Top offer mate, we'll see how we're placed on the day. Need to see if you can prise me out of Jock's passenger seat 1st.
www.OlberMOTIVE.com - Central Scotlands answer to your Mr2 needs.